|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
5th September 2011, 06:28 PM
|
#1 |
|
diyAudio Member
Join Date: Jul 2005
Location: D-55629 Schwarzerden
|
Tone Control Network for ZEN/Aleph based on James-Baxandall's topology
Are there circuits for tone control network, based on James-Baxandall's topology, suited for the Aleph- or ZEN topology without additional line gain stages (i. e. frequency dependend NFB network instead only two resistors)?
Thank you very much for advices. |
|
|
5th September 2011, 07:15 PM
|
#2 |
|
diyAudio Member
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
|
I think not , due to limited OLG of amps itself
__________________
my Papa is smarter than your Nelson ! tnx to  clean  thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; BAF Forum & Gallery;I'm dumb
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Ultimatest Passive Tone Control Network based on James-Baxandall's topology wanted | tiefbassuebertr | Solid State | 22 | 22nd March 2012 12:29 PM |
| PC-based server versus network-based player | hillbear | PC Based | 14 | 12th July 2011 12:13 AM |
| "CA-10", new Single Ended Power amp Device based on Aleph or ZEN ? | tiefbassuebertr | Pass Labs | 1 | 29th September 2010 06:55 PM |
| i need preamp schematics w/o tone control or volume control | hernanstafe | Parts | 7 | 30th January 2008 03:12 AM |
| enough gain for James tone stack | PRNDL | Tubes / Valves | 17 | 21st December 2007 02:28 PM |
| New To Site? | Need Help? |
| Page generated in 0.05799 seconds (75.63% PHP - 24.37% MySQL) with 10 queries |
