B1 newbie qusestion - diyAudio
Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th May 2011, 01:20 PM   #1
diyAudio Member
 
Join Date: Sep 2010
Default B1 newbie qusestion

I was wondering if I am understanding Nelson's B1 board right as far as
wiring the pots. Does the CCW mean counter clockwise, CW clockwise
and if it does how would you verify this via a meter? Any help would be
greatly appreciated

  Reply With Quote
Old 28th May 2011, 04:38 PM   #2
2quad is offline 2quad  Norway
diyAudio Member
 
2quad's Avatar
 
Join Date: Aug 2008
Location: Oslo, Norway
Quote:
Originally Posted by bugeyes View Post
I was wondering if I am understanding Nelson's B1 board right as far as
wiring the pots. Does the CCW mean counter clockwise, CW clockwise
and if it does how would you verify this via a meter? Any help would be
greatly appreciated

Hi bugeyes!

You got the CCW and CW right. The third terminal is the viper. When you turn the pot fully CCW, you should measure close to zero ohms between the viper and the CCW terminal. Between the viper and the CW terminal you should then measure the full pot resistance. Turning the pot fully CW will give opposite results. Good luck!
  Reply With Quote
Old 28th May 2011, 10:52 PM   #3
diyAudio Member
 
Join Date: Sep 2010
2quad,
many thanks for your help!
cheers
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
B1 Buffer and some help please!!!! Malka07 Pass Labs 4 28th May 2012 07:18 PM
Help diagnosing B1 Build (newbie) dasfreak Pass Labs 4 30th November 2010 01:56 AM
B1 pre earth safety question (newbie) scorpio1 Pass Labs 2 16th June 2009 04:30 PM
sk30 for B1 polygon Pass Labs 4 12th April 2009 05:14 PM
B1 with no in/out capacitors.. Chul Pass Labs 9 23rd March 2009 09:20 PM


New To Site? Need Help?

All times are GMT. The time now is 12:03 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2