diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Sharing my build progress of the F4 and Aleph 30 (http://www.diyaudio.com/forums/pass-labs/188643-sharing-my-build-progress-f4-aleph-30-a.html)

eeyore 8th May 2011 09:58 PM

Sharing my build progress of the F4 and Aleph 30
 
Hi, I am in the progress of building Alpeh 30 and 2x F4, and am sharing my build progress experience at my blog: DIY Audio Blog. Hope people find it helpful. Especially with the F4 build, where the threads are quite long, I hope to distill the key information to aid in the new builder.

3GGG 9th May 2011 12:15 AM

Nice page, well done. What are you going to be driving with the F4's?

eeyore 9th May 2011 12:42 AM

Thanks. I was going to take the example in the service manual and mate it with a flea power tube amp. I have been trying to build a DRD with 45 tubes, which produces around 1 to 2 W of power. And since I am building 2 of the F4, I can use a passive cross-over between the DRD and the F4 for both the HF and LF. This I think will allow me to experiment with so many different drivers. But the Aleph 30 build should be finished first, and I plan to mate that with the Jordan JX92s and Eminence Alpha 15A open baffle as per MJK's design.


All times are GMT. The time now is 11:48 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2