Bride of Zen problem - Page 11

arold19 · 22nd January 2004, 03:27 AM

Thank you for the answer.
I have 93 v without load and about the same with the load, I think I loose about 0.5 v with the load.
Maybe this is cause by a high power transformer....120VA ???

joensd · 22nd January 2004, 08:03 AM

Yes, the higher the VA-rating of the transformer the better the regulation with smallish loads.

arold19 · 10th February 2004, 02:09 AM

Hello ! I just want to say that my noise problem with my bride of zen is now gone. Today, I receive the new Plitron transformer and they put a magnetic shield around the transfo. Now, I have no noise at all even at very high level !!!

My Zen V4 was off during more that 2 mounth.
Thank you to everybody who helped me.

Anorgan · 10th February 2004, 10:06 AM

I'm happy to hear that your problem is gone, enjoy listening!!

till · 10th February 2004, 10:12 AM

GypsyKing · 17th May 2010, 02:04 AM

Can anyone tell me what is the physical size of the Bride of Zen Preamp PCB downloaded from the Pass site??.When I print it out it looks small for the components to be fitted..Please can someone give me the size..Please if you can email it to me .. jackyjack21@yahoo.com

Thanks..

mjf · 09:36 PM

hello.
printed out mine was around 12 cm x 13 cm...............and i built it this size.
but you can zoom it a little bit so it better fits to your parts (lead distances).
greetings

17th May 2010, 02:04 AM	#106
GypsyKing diyAudio Member Join Date: Mar 2009	Bride Of Zen Problem Can anyone tell me what is the physical size of the Bride of Zen Preamp PCB downloaded from the Pass site??.When I print it out it looks small for the components to be fitted..Please can someone give me the size..Please if you can email it to me .. jackyjack21@yahoo.com Thanks..

19th May 2010, 09:24 PM	#107
mjf diyAudio Member Join Date: Jan 2009 Location: upper austria/near linz	hello. printed out mine was around 12 cm x 13 cm...............and i built it this size. but you can zoom it a little bit so it better fits to your parts (lead distances). greetings Last edited by mjf; 19th May 2010 at 09:36 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bride of Zen r2	zei	Pass Labs	0	4th July 2007 07:43 PM
New PCB for bride of zen	maartentje	Pass Labs	6	28th February 2005 07:19 AM
PCB for Bride of zen	kirc	Pass Labs	16	5th January 2003 05:16 PM
Bride of Son of Zen for Mic Pre?	blschuler	Pass Labs	1	16th October 2002 02:31 AM
PCB for Bride of zen	kirc	Solid State	0	23rd January 2002 12:28 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

22nd January 2004, 03:27 AM	#101
arold19 diyAudio Member Join Date: Nov 2002 Location: montreal	Thank you for the answer. I have 93 v without load and about the same with the load, I think I loose about 0.5 v with the load. Maybe this is cause by a high power transformer....120VA ???

22nd January 2004, 08:03 AM	#102
joensd diyAudio Member Join Date: Dec 2001 Location: Germany	Yes, the higher the VA-rating of the transformer the better the regulation with smallish loads.

10th February 2004, 02:09 AM	#103
arold19 diyAudio Member Join Date: Nov 2002 Location: montreal	Hello ! I just want to say that my noise problem with my bride of zen is now gone. Today, I receive the new Plitron transformer and they put a magnetic shield around the transfo. Now, I have no noise at all even at very high level !!! My Zen V4 was off during more that 2 mounth. Thank you to everybody who helped me.

10th February 2004, 10:06 AM	#104
Anorgan diyAudio Member Join Date: Jul 2003 Location: Croatia	I'm happy to hear that your problem is gone, enjoy listening!!

10th February 2004, 10:12 AM	#105
till Banned Join Date: Apr 2002 Location: Germany, Clausthal

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)