DIY D1 I/V STAGE

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Official Court Jester
Joined 2003
Paid Member
it's hard to say that Papa B. isn't shunt aficionado , when he made one of most brute shunt regs around :clown:

anyway - whatever you change - you must recheck that important point .

if you have no intention to use proper shunt instead of dreky LMs - at least put proper cap multipliers between them and D1 ;
 
Wayne - just curious ......

you use 1704 instead of 63 from sonic , or availability reasons ?

The PCM1704 was used for the 24/96 update. The PCM63 was only 20 bits.
I still like the PCM63 sonics and the guys who designed both like the 63 better for some internal reason. The 1704 had less current swing hence the use of two.

Just curious too ;)

Would it also apply to pcm 1794 in the same way?

Manu
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.