DIY D1 I/V STAGE
 User Name Stay logged in? Password
 Home Forums Rules Articles Store Gallery Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read Search

 Pass Labs This forum is dedicated to Pass Labs discussion.

 Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
 13th March 2011, 04:35 PM #21 diyAudio Member     Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain for your needs - you need to decrease sum current for regs to - say ~ 60mA max ( increase R1 in both regs to 10 ohms) there is no need for more of that , if active stage is drawing 20mA that way - roughly -overall consumption per channel is 60mA x Vdc = 60mA x 1,41 x 30V x2 regarding needed amplitude of output signal considering that current output of PCM for full blast is +/-1.2mA - just divide your needed p-p amplitude with 2,4mA and you'll get value for R6 this way ( with R6 1K5) , you'll have 3V6pp on output if you're going to use set of regs for both channels - go for 100mA as programmed current ; in that case R1's must be around 6R5 __________________ my Papa is smarter than your Nelson ! tnx to clean thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; Mighty ZM's Bloggg;I'm dumb Last edited by Zen Mod; 13th March 2011 at 04:38 PM.
 13th March 2011, 04:53 PM #22 diyAudio Member     Join Date: Sep 2009 Location: Catalonia new Europe state So 4Vpp divided 2,4mA = 1k666 for R6 & I will have 2Vrms?
 13th March 2011, 07:43 PM #23 diyAudio Member     Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain math is simple __________________ my Papa is smarter than your Nelson ! tnx to clean thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; Mighty ZM's Bloggg;I'm dumb
 13th March 2011, 10:07 PM #24 diyAudio Member     Join Date: Sep 2009 Location: Catalonia new Europe state Thank you ZM
 13th March 2011, 10:15 PM #25 diyAudio Member     Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain you're welcome ; answers are simple when questions are well constructed . __________________ my Papa is smarter than your Nelson ! tnx to clean thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; Mighty ZM's Bloggg;I'm dumb
diyAudio Member

Join Date: Sep 2009
Location: Catalonia new Europe state
Quote:
 Originally Posted by Iloveswan You should raise R2a's value a little bit unless you can accept around 1Vrms output. If you raise R2a's value, you need to change source resistors value accordingly too. About Mosfet match, it's easy to get a 1% Vgs matched pair from same production batch.
@ZM
So don't need to change R2 as Iloveswan suggested & he do bad calculations 1Vrms instead 1.8Vrms?

Last edited by merlin el mago; 14th March 2011 at 09:45 AM.

 14th March 2011, 10:01 AM #27 diyAudio Member     Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain leave R2 as is __________________ my Papa is smarter than your Nelson ! tnx to clean thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; Mighty ZM's Bloggg;I'm dumb
 14th March 2011, 10:13 AM #28 diyAudio Member     Join Date: Sep 2009 Location: Catalonia new Europe state
diyAudio Member

Join Date: Oct 2010
Location: San Jose
Quote:
 Originally Posted by merlin el mago @ZM So don't need to change R2 as Iloveswan suggested & he do bad calculations 1Vrms instead 1.8Vrms?
Correct. you should change R6 not R2... sorry for typo...

 16th March 2011, 10:24 AM #30 diyAudio Member     Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain naah ....... what's few numbers between friends ...... __________________ my Papa is smarter than your Nelson ! tnx to clean thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; Mighty ZM's Bloggg;I'm dumb

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is OffTrackbacks are Off Pingbacks are Off Refbacks are Off Forum Rules

 Similar Threads Thread Thread Starter Forum Replies Last Post promitheus Swap Meet 102 25th February 2011 09:03 PM

 New To Site? Need Help?

All times are GMT. The time now is 12:47 AM.