Pre amp for Aleph J-X - diyAudio
Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 27th December 2010, 11:06 PM   #1
3GGG is offline 3GGG  Australia
diyAudio Member
 
Join Date: Mar 2010
Default Pre amp for Aleph J-X

I will be building Aleph J-X mono blocks and will need to change or mod my exixting pre.
My system consists of the HPS 5.1 phono stage and the "lighter note" pre currently.
Is the a mod i could make to the passive pre or is it just as easy to start from scratch.

I would prefer suggestions with available PCB's as I have alot on the go ATM.
  Reply With Quote
Old 29th December 2010, 05:57 AM   #2
3GGG is offline 3GGG  Australia
diyAudio Member
 
Join Date: Mar 2010
I am thinking the pumpkin looks good!
  Reply With Quote
Old 30th December 2010, 09:07 PM   #3
3GGG is offline 3GGG  Australia
diyAudio Member
 
Join Date: Mar 2010
I dont need balanced, it would be a shame to not use half the compponents, any other ideas, keep em comin!
  Reply With Quote
Old 31st December 2010, 02:37 AM   #4
kp93300 is offline kp93300  Malaysia
diyAudio Member
 
Join Date: Mar 2007
I use the simple j310 jfet pre with a salas shunt power supply replacing the cap multiplier .I use it with the aleph J and the lightspeed clone .
kp93300
Attached Images
File Type: png jboz j310 + cap_mult-sch-1.png (1.9 KB, 199 views)
  Reply With Quote
Old 31st December 2010, 02:38 AM   #5
kp93300 is offline kp93300  Malaysia
diyAudio Member
 
Join Date: Mar 2007
forgot to mention that this is from JUMA
  Reply With Quote
Old 31st December 2010, 02:46 AM   #6
Zen Mod is offline Zen Mod  Serbia
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
if anyone is thinking about using any X amp to full potential , feeding it with balanced signal is a must ;

what will feed it , that's another issue ; there are numerous balanced DACs able to work alone and , if not , numerous balanced preamps .
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa... by Mighty ZM
  Reply With Quote
Old 31st December 2010, 07:04 AM   #7
3GGG is offline 3GGG  Australia
diyAudio Member
 
Join Date: Mar 2010
Thanks guys, I will still build the Pumpkin. For now I am using my DIY slate TT and the HPS 5.1
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SIMPLE Aleph Pre-amp, jleaman Pass Labs 23 19th November 2009 03:16 AM
Chip-Amp for Aleph P 1.7 Pre ... ilsindaco66 Chip Amps 4 15th August 2007 04:58 PM
best pre amp for pass aleph 5 & beginning builder! Paulus1981 Pass Labs 5 4th April 2006 04:10 PM
Pre-Amp Pass Aleph L Laketown Pass Labs 5 18th September 2003 11:10 PM
Aleph 4 Pre Amp Recommendations bacworth Pass Labs 2 19th December 2001 10:15 AM


New To Site? Need Help?

All times are GMT. The time now is 04:59 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2