Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

To Mr Nelson Pass, XA160.5 with Wilson Sashas?
To Mr Nelson Pass, XA160.5 with Wilson Sashas?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th December 2010, 11:41 PM   #31
JR_W is offline JR_W  United States
diyAudio Member
 
Join Date: Jan 2009
Quote:
Originally Posted by Nelson Pass View Post
My sheet indicates that the XA100.5 will peak out at about
28 amps, so it should have a little reserve....

Yet Keyser is worried about the XA160.5 not being enough amp...

FWIW, I drive speakers with lower sensitivity (89dB) yet slightly higher impedance (6 ohm minimum) with XA60.5s and plenty loud. But I admit I have seen the needles twitch. I'd be all over those XA160.5, personally.
  Reply With Quote
Old 29th December 2010, 12:36 AM   #32
jacco vermeulen is offline jacco vermeulen  Netherlands
diyAudio Member
 
jacco vermeulen's Avatar
 
Join Date: Oct 2004
Location: At the sea front, Rotterdam or Curaçao
Send a message via Yahoo to jacco vermeulen
Quote:
Originally Posted by Zen Mod View Post
even better ..... you need
Mm, i happen to have a couple of Siemee Micromasters.

(Did someone say $10k ? For $10k a pair, i'd take 2 sets, even 115Vac ones. They're +$30k a pair overhere, afair)
__________________
Why does it hurt when I Pee ? (Ay Ay Ay https://www.youtube.com/watch?v=w5fLGWrHouk)
  Reply With Quote
Old 29th December 2010, 12:44 AM   #33
Zen Mod is offline Zen Mod  Serbia
Official Court Jester
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
To Mr Nelson Pass, XA160.5 with Wilson Sashas?


but their sine is soooo smoooth

and even Sascha can't dispute their A-wesomesssnesss
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa...© by Mighty ZM
  Reply With Quote
Old 29th December 2010, 01:37 AM   #34
a.wayne is offline a.wayne  United States
Sin Bin
 
Join Date: May 2008
Location: Front Row Center
Sasha Halcro ... Prefer Sasha Cohen ...

Don’t Worry, Sasha Cohen: I’m Still Pulling For You | Sportress of Blogitude
  Reply With Quote
Old 29th December 2010, 04:42 AM   #35
Nelson Pass is offline Nelson Pass  United States
The one and only
 
Nelson Pass's Avatar
 
Join Date: Mar 2001
To Mr Nelson Pass, XA160.5 with Wilson Sashas?
Quote:
Originally Posted by JR-W View Post
Yet Keyser is worried about the XA160.5 not being enough amp...
At 36 amps peak, I can't imagine why it wouldn't edge out the
XA100.5 in this regard.

  Reply With Quote
Old 29th December 2010, 12:14 PM   #36
tryonziess is offline tryonziess  United States
diyAudio Member
 
Join Date: Apr 2007
This discussion is about some very serious equipment. Just how big is the room you plan to install your setup in? As many qualified individuals have stated previously the majority of the music material will never use more that 10 watts of output power. Just one more reason why SE tube amps are so popular.
Since this is the DIY audio forum I suggest you find a good layout here and build your own. Nothing sounds better than home grown. I really liked my massive Mcintosh setup and was totally pleased with the quality of sound. However, I also like my Leach clone DIY amp and all the extra money I was able to stash away when I sold the Mac gear.
Honestly you will enjoy building and learning. The overall rewards far exceed the name plate heading on any amplifier especially when the name on the amp is your own.

Do not tell me none of you guys have never been swayed by a nice looking YOUNG curvy saleswomen.

Tad
  Reply With Quote
Old 19th June 2017, 01:09 AM   #37
alfa100 is offline alfa100  South Africa
diyAudio Member
 
Join Date: Sep 2014
i have the Pass Labs Xa 100.8 driving Wilson Sasha mk i.
alos been wondering if i should uograde to Xa 160.8.

But Xa 100.8 max output current is 40 amps. this is better than the Xa 160.5 which has 36 amps.
Therefore the Xa 100.8 should control the Sasha better than the Xa 160.5


Is this correct Mr Nelson Pass?
  Reply With Quote
Old 19th June 2017, 06:34 PM   #38
Nelson Pass is offline Nelson Pass  United States
The one and only
 
Nelson Pass's Avatar
 
Join Date: Mar 2001
To Mr Nelson Pass, XA160.5 with Wilson Sashas?
The current limit figure here is pretty arbitrary and based on the value
of zener diode protection. I wouldn't worry about it.

You do realize that 36 amps into 1.8 ohms is about 2300 watts...
  Reply With Quote
Old 19th June 2017, 07:17 PM   #39
Zen Mod is offline Zen Mod  Serbia
Official Court Jester
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
To Mr Nelson Pass, XA160.5 with Wilson Sashas?
isn't it better to PL Volks when someone buy new amp from them ?

__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa...© by Mighty ZM
  Reply With Quote
Old 20th June 2017, 12:04 AM   #40
alfa100 is offline alfa100  South Africa
diyAudio Member
 
Join Date: Sep 2014
Quote:
Originally Posted by Nelson Pass View Post
The current limit figure here is pretty arbitrary and based on the value
of zener diode protection. I wouldn't worry about it.

You do realize that 36 amps into 1.8 ohms is about 2300 watts...
Thank you Nelson
  Reply With Quote

Reply


To Mr Nelson Pass, XA160.5 with Wilson Sashas?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Happy Birthday Mr. Nelson Pass! Blues Pass Labs 892 29th June 2017 10:15 PM
for Nelson Pass or Mr Curl lt cdr data Solid State 31 16th December 2004 09:02 AM
To Mr. Nelson Pass lumanauw Pass Labs 39 29th February 2004 02:45 AM
My opinion on Pass Labs and Mr. Pass (Nelson) himself b_online Pass Labs 11 21st May 2003 01:39 AM


New To Site? Need Help?

All times are GMT. The time now is 07:38 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki