|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
24th November 2010, 10:04 AM
|
#1 |
|
diyAudio Member
Join Date: Apr 2010
|
Help needed to start F3 building
Hello,
I need some help with planning to build F3 amplifier. I allready have power supply with 500VA and 2 x 53VDC. Where can i get PCB:s for two channels? I have tried to search from this forum and Google for whole day without results. I also need complete schematic, PCB layout, map for component placement and parts list. Thanks ! |
|
|
26th November 2010, 12:15 PM
|
#3 |
|
diyAudio Member
Join Date: Aug 2010
Location: Leipzig
|
I have build the F3 last month.
Because it is nearly impossible to get some PCB´s for the F3 I decidet to make my own one. If u want to get some pcb´s please send me a message. Also can help to get the LU1014D or the output capacitors. Markus |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newbie question: Where to start on building audio splitter/selector | divisionbyzorro | Chip Amps | 5 | 11th November 2011 09:29 AM |
| Building F3 - Clone Suds version | imagios | Solid State | 56 | 4th July 2011 06:40 PM |
| F3 jfets needed | coils | Pass Labs | 4 | 5th October 2007 08:23 PM |
| soft start needed? | facundonu | Power Supplies | 3 | 5th March 2007 07:41 PM |
| want to start amplifier building! | xstephanx | Solid State | 13 | 16th January 2006 02:48 PM |
| New To Site? | Need Help? |
