what aleph disign is best to drive thiel cs3.7?

mariussuiram82 · 4th November 2010, 05:03 PM

I own a pair of thiel cs3.7 speakers. I like like them very much. I would like to build a pass disign to drive them. I wonder what disign would be the best to drive the thiels with a minimum load of 2.8 ohm.

What would you reccoment to build?

Nelson Pass · 4th November 2010, 09:52 PM

Low impedances are not really the Aleph's forte. Unless
you are listening at low levels, I would consider a push-
pull follower design.

Reminds me that I should do one....

mariussuiram82 · 4th November 2010, 10:40 PM

Hmm. probebly the most reliable reply to my topic. Very happy with your responce. But...

This means you don't have a adress for the pcb's already. So this leaves me with the question, build another speaker because i like the aleph 2 and xa60.5 sound (no offence. these are the only ones i heard) or do some research for schemetic / pcb's to drive my beloved thiels.

Please remind me if you did one....

so i can have best of both worlds

Zen Mod · 4th November 2010, 11:45 PM

make balanced F4

BobEllis · 5th November 2010, 12:13 AM

BA-2? Looks an awful lot like an Aleph with an afterburner.

4th November 2010, 05:03 PM	#1
mariussuiram82 diyAudio Member Join Date: Nov 2009	what aleph disign is best to drive thiel cs3.7? I own a pair of thiel cs3.7 speakers. I like like them very much. I would like to build a pass disign to drive them. I wonder what disign would be the best to drive the thiels with a minimum load of 2.8 ohm. What would you reccoment to build?

4th November 2010, 11:45 PM	#4
Zen Mod diyAudio Member Join Date: Jan 2003 Location: ancient Batsch , behind Iron Curtain	make balanced F4 __________________ my Papa is smarter than your Nelson ! tnx to clean thread ; Cook Book ; PSM LS Cook Book ; Baby Diyaudio FORUM ; BAF Forum & Gallery;I'm dumb

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WHY???? Midrange magnet's vented pole piece sealed by design - Thiel CS3.5 ????	dtm1962	Multi-Way	1	24th July 2008 04:28 PM
Can Aleph 3 drive 15" 97dB woofer?	Sony	Pass Labs	4	15th January 2008 06:23 PM
Thiel CS3.5 Driver Replacement	paolo66	Multi-Way	2	25th October 2006 04:34 AM
Thiel CS3.6 Driver Replacement	bostonflyer	Multi-Way	1	23rd October 2005 02:08 AM
please help me out with this sub disign	Christof	Subwoofers	3	2nd January 2004 01:55 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th November 2010, 09:52 PM	#2
Nelson Pass The one and only Join Date: Mar 2001	Low impedances are not really the Aleph's forte. Unless you are listening at low levels, I would consider a push- pull follower design. Reminds me that I should do one....

4th November 2010, 10:40 PM	#3
mariussuiram82 diyAudio Member Join Date: Nov 2009	Hmm. probebly the most reliable reply to my topic. Very happy with your responce. But... This means you don't have a adress for the pcb's already. So this leaves me with the question, build another speaker because i like the aleph 2 and xa60.5 sound (no offence. these are the only ones i heard) or do some research for schemetic / pcb's to drive my beloved thiels. Please remind me if you did one.... so i can have best of both worlds

5th November 2010, 12:13 AM	#5
BobEllis diyAudio Member Join Date: Sep 2003 Location: Upstate NY	BA-2? Looks an awful lot like an Aleph with an afterburner.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)