Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

Aleph60 max output current
Aleph60 max output current
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 8th July 2003, 11:23 PM   #1
g_low is offline g_low  United States
diyAudio Member
Join Date: May 2003
Location: Atlanta, GA
Default Aleph60 max output current

Hi all,

I am looking into using a pi filter (C-L-C) for the Aleph 60 and need verification on the maximum RMS current supplied by the power supply to determine a suitable filter choke such as a Hammond 156B. I have looked at the specs and talked with the supplier and the choke will not saturate until 8A plus. That's great, but I am concerned about the power dissipation. Its rated for 5A @ 40C... After reviewing the A60 circuit and patent on the current source, it appears that the peak current delivered to the load is approximately 4.5A (2Xbias current). The RMS current is 4.5A/sqrt(2)= 3.2A. Operating the choke under this condition is ok if may analysis is correct.

I am also concerned because in the A60 manual the maximum output is rated at 8A? I do not understand how this value was determined.

Can someone please advise.


  Reply With Quote
Old 9th July 2003, 07:18 PM   #2
Nelson Pass is offline Nelson Pass  United States
The one and only
Nelson Pass's Avatar
Join Date: Mar 2001
Aleph60 max output current
Go with the average DC draw, and don't worry
about it, as anything else will be short term transient.
  Reply With Quote


Aleph60 max output currentHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aleph60 PSU capacitors SeanPool Pass Labs 0 7th February 2004 03:41 PM
Aleph60 question regarding resistors and schematic.... mats73 Pass Labs 2 5th May 2003 10:04 AM
Even more.. This is an Aleph60 hifi Pass Labs 9 21st February 2003 11:54 AM
Aleph60 Dumb Question PaulyG Pass Labs 12 12th February 2003 11:35 PM
Aleph60 project clemence Pass Labs 7 27th June 2001 04:02 PM

New To Site? Need Help?

All times are GMT. The time now is 04:23 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio