Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

aleph x power supply question
aleph x power supply question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st July 2003, 12:08 PM   #1
audionut is offline audionut
diyAudio Member
Join Date: Jan 2002
Location: Cleveland ohio
aleph x power supply question
Default aleph x power supply question

I have a good sized transformer that in a power supply, would give either 16 or 32 volt rails.

32 volt rails would result in a big amp with an awful lot of bias current running through it. Could I use 32 volt rails and bias the amp for 30 or 40 watts of output power??

In my readings I see that Nelson Prefers the higher rails for the Aleph X.

Or am I ahead just using the 16 volt rails and biasing fully for 16 volt rails.
  Reply With Quote
Old 1st July 2003, 12:13 PM   #2
Taco is offline Taco  Netherlands
diyAudio Member
Join Date: Nov 2002
Location: Chicago
I would say that 16 volts is a better option.

I used this excel-file to calculate the different options
Attached Files
File Type: zip x berekening v2.zip (4.3 KB, 76 views)
  Reply With Quote
Old 1st July 2003, 02:03 PM   #3
jarek is offline jarek
diyAudio Member
Join Date: Dec 2002
Location: Poland
My AX has 14,5 V rails. Without load it can achieve 18V peak before clipping. Than:
Prms= 12,7x12,7/8 (for 8 ohm load) = 20,15 W
This power is maximum what we could get if the bias current would be enough.
IMO with your 16 V rails the power will be a little bit more only.
But from the other side 36V is too much...
  Reply With Quote


aleph x power supply questionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aleph P.17 Power Supply Bengali Pass Labs 6 6th October 2008 06:24 PM
Aleph 2/4 Power Supply Question onewhowaits Pass Labs 8 5th September 2006 08:21 AM
Power supply question for Aleph 2 TJ Pass Labs 3 24th August 2006 02:49 AM
Big supply cap question (Aleph X) SY Power Supplies 0 20th July 2005 12:02 AM
Aleph 2 power supply caps question MikeZ Pass Labs 0 20th October 2004 07:55 PM

New To Site? Need Help?

All times are GMT. The time now is 03:09 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio