diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   Other DIY Pass pre amps (http://www.diyaudio.com/forums/pass-labs/171061-other-diy-pass-pre-amps.html)

Russellc 30th July 2010 01:53 PM

Other DIY Pass pre amps
 
Really like the B-1, but with some speakers a little gain is needed in my setup.
I have seen some older posts ( '05 ) that suggested the P 1.7 or something similar. Anything better since then? Circuit board availability would be a plus! I'm building the Pearl 2, so only line stage is needed.

Russellc

ra7 30th July 2010 02:10 PM

Check out the JFET BOZ thread here... doesn't get simpler than that. Apart from that there's the preamps on the passdiy site... BOZ and BOSOZ.

njepitt 30th July 2010 03:00 PM

There's also juma's BF862 preamp, which I have been very happy with.

Nigel

Russellc 30th July 2010 08:04 PM

Quote:

Originally Posted by ra7 (Post 2258228)
Check out the JFET BOZ thread here... doesn't get simpler than that. Apart from that there's the preamps on the passdiy site... BOZ and BOSOZ.

I have the board for BOZ already. I'll put that sucker together, I've had those boards since the 90's! (Have the Zen board as well.)

russellc

AirPuncher 19th January 2011 06:08 PM

Am looking for a pcb's or the layouts for the Aleph P 1.7 There was guy in Poland who did some in a simple format some years back rather than the German version still available with all the bells and whistles. Anyone able to help on this.:)

Zen Mod 19th January 2011 06:49 PM

I have pdfs for acaudio.de version

shoot me with PM and I'll send them , if needed

they're too big for forum

Bill Fuss 20th January 2011 09:45 AM

Erno Borbely published a very simple balanced jfet line stage years ago in AX, very elegant and very similar to a Bosoz or P. It sounds excellent and is easy to build. You can find it with a Google search.

nar 20th January 2011 11:48 AM

Quote:

Originally Posted by Russellc (Post 2258213)
Really like the B-1, but with some speakers a little gain is needed in my setup.
I have seen some older posts ( '05 ) that suggested the P 1.7 or something similar. Anything better since then? Circuit board availability would be a plus! I'm building the Pearl 2, so only line stage is needed.

Russellc

Don't forget the UGS by CheefDeGaar :) That's what I will test next.

We recently designed a motherboard for the UGS preamp with user PierreQuiRoule, with the following features :
  • Support of any UGS versions modules ( fixation holes and connector pins are true "UGS standard")
  • Integrates circuitry for 6 inputs; 2 balanced 4 unbalanced, has 2 sets of direct parallel outputs, balanced ( bi amp in mind )
  • Versatile use of relay coils DC is possible : 5,12, 24 V ...
  • Only a single Lorlin (external) 2C6POS is needed for relays switching and led signalisation (additional source of DC for the circuitry is also needed)
  • Automatic switch to GND of the minus inputs of the UGS when using unbalanced sources, no headache ( easy unbal to bal converter )
  • Balanced ladder connections are implemented ( 50k, volume before the UGS )
  • Double mono PSU is what we had in mind. However, it is also usable with a single audio power supply ( +/-24V ).

We also re-arranged a little the UGS_V3 layout. Boards about same dims, slightly greater size pads for soldering.

I can't really tell more for now. It's top-secret ! :eek:

Best,

nAr

cjkpkg 20th January 2011 09:33 PM

another +1 for the JFETBOZ!

Rudymay1945 20th January 2011 10:28 PM

+2 for JFETBOZ with Pearl 2. Great combo but you have to manage the gain some.


All times are GMT. The time now is 05:28 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2