Pictures of your diy Pass amplifier

[oiphy]

switch

Danger Mouse, nice! love it!. Can i ask where did you buy the front
power push button?, i am looking for a similar power switch...

try this site too: Illuminated Vandal Resistant switches - IP66 sealing - by Bulgin Components

 

[turboyam]

try this site too: Illuminated Vandal Resistant switches - IP66 sealing - by Bulgin Components

Those ones are really nice but 50ma @ 24 volts!!!. I'd like to skip the relay approach, wanna keep it KISS...

 

[KatieandDad]

Well I've finally added a B1 to the Aleph 4 - What a WONDERFUL combination.

In its initial guise it supported a 15VA EI transformer and a capacitive Multiplier with MKS caps throughout.

It grew up very quickly and supported a 30VA toroid with substantial CRC PSU. This dropped the CM. The B1 also then got modded with Siemens MKP caps at the input and Obligatto PIOs at the output.

RESULT - MUSICAL NIRVANA.

 

[apj1]

Aleph X

A good amplifier. Finishing.

Greetings.

 

[mantonto]

My Pass F5!!

very good amplifier!
some pics:

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

another pics at
Pass F5

Now i need a new good preamplifier on the same level...

Bye!

 

[Tiroler]

My brandnew UGS preamp

 

[EUVL]

Great stuff. Excellent work.
Heartiest congradulations.

Why not show us the inside as well ?


Schönen Gruß,
Patrick

 

[VT67]

Man, that is diy at the highest level.
Pics of the inside please.

Regards

 

[Tiroler]

Thanks, you can find what you want in the correct thread, here http://www.diyaudio.com/forums/pass-labs/86300-ugs-adventures.html
Martin

 

[6L6]

Martin, there are commercial manufacturers who couldn't make things that nice if they tried! Congratulations on a stunning project!!!

 

[CENTRAL]

Having seen all of the thread, I have to say this is the perfect reading for anyone exploring the potential of diy...

Congratulations everybody!

 

[maelcum73]

this looks like a little piece of l'art to me

 

[maelcum73]

this looks like a little piece of l'art to me

I am reffering to post #999 by merlin2069er and to his jfet boz

 

[merlin2069er]

Thanks!

I thought I had posted the complete jfet boz. Anyways, here it is...

An externally hosted image should be here but it was not working when we last tested it.

 

[culture]

@Martin: What an incredible nice build! very impressive

 

[dvb projekt]

I have finished my F5 today

​

 

[Holger Barske]

Nice one. Metalwork looks like modushop.biz. Where did you get the front and backplate surface done?

 

[dvb projekt]

Nice one. Metalwork looks like modushop.biz. Where did you get the front and backplate surface done?

Hi Holger,

the chassis is a 3U 400mm deep from modushop, correct.
The front and backplate design is made by myself and machined by Schaeffer AG in Berlin.

 

[VT67]

I assume you sent the original Modushop front and back plate to Schaeffer?

I was wondering if you can get those galvanized corner profiles, to bolt the case together, separatly?

Walter

 

[dvb projekt]

I assume you sent the original Modushop front and back plate to Schaeffer?

I was wondering if you can get those galvanized corner profiles, to bolt the case together, separatly?

Walter

Hi Walter,

Schaeffer machined the original plates from modushop, yes.
About the corner profiles, i would ask them.