diyAudio (
-   Pass Labs (
-   -   6-channel X250 build (

Tarasque 17th March 2010 03:55 PM

6-channel X250 build
In this thread I'm going to post the updates for my 6 channel X250 amplifier.

This will be housed in 2 cases, one for each of the Orion speakers.

The plan is to use 4 toroids of 2KVA at 40 - 0 - 40V for the power stage and 60V for the driver stage.

This is the case planning.

Tarasque 17th March 2010 03:58 PM

Case planning
2 Attachment(s)
Case planning

Attachment 162954

Attachment 162955

Magura 17th March 2010 08:53 PM

Ambitious :cool:

Magura :)

h_a 19th March 2010 01:41 PM

Hi Marcel,

what happened? The Orion is a 4-way, so 6 channels...?

Have fun, Hannes

PS: don't know if you're still interested, the Krell board is populated and now being tested...

Tarasque 19th March 2010 05:55 PM

The 2 units in the woofer section will be in parallel :D

Tarasque 19th March 2010 06:03 PM

1 Attachment(s)
This is the driver section of one channel.

All times are GMT. The time now is 10:39 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2