F2 Set Up

Puffin · 10th February 2010, 06:31 AM

I have nearly finished my F2 build using Peter Daniel's boards. I cannot find the thread which explains the set up and trimpot tweaking. Can anyone help?

I would also ask for confirmation that the inrush current limiter is simply soldered between the hot and cold 240v AC IN.

Thanks.

vitalstates · 07:33 AM

Quote:

Originally Posted by Puffin

I would also ask for confirmation that the inrush current limiter is simply soldered between the hot and cold 240v AC IN.

Thanks.

Don't think so, no!.

thermistor should be in series with tx primary. If your primary is in 2 windings of 0-120 then you can put the thermistor between the 2 windings.

Bias should be adjusted so that there is half the supply voltage at the positive end of C3.

Ed

edit: this thread tells most of the story.....

DIY F2 clone

Puffin · 10th February 2010, 07:59 AM

Ed. Thanks for your reply. I did look through that thread and saw a post regarding adjusting the supply voltage, but there was no reply so I wasn't sure if that was correct. The primary winding is one 240v feed.

10th February 2010, 06:31 AM	#1
Puffin diyAudio Member Join Date: Feb 2006 Location: U.K	F2 Set Up I have nearly finished my F2 build using Peter Daniel's boards. I cannot find the thread which explains the set up and trimpot tweaking. Can anyone help? I would also ask for confirmation that the inrush current limiter is simply soldered between the hot and cold 240v AC IN. Thanks.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alembic F2-B	phil mailloux	Instruments and Amps	101	12th October 2011 02:07 PM
F2	Puffin	Pass Labs	13	25th August 2009 03:34 PM
Building a better F2?	FYC	Pass Labs	4	22nd August 2009 02:29 PM
F2 Gain	FYC	Pass Labs	4	10th February 2009 06:04 AM
Iron set for Paraglow (2A3) SET amplifier	Alain Favret	Swap Meet	1	19th March 2004 06:23 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th February 2010, 07:59 AM	#3
Puffin diyAudio Member Join Date: Feb 2006 Location: U.K	Ed. Thanks for your reply. I did look through that thread and saw a post regarding adjusting the supply voltage, but there was no reply so I wasn't sure if that was correct. The primary winding is one 240v feed.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)