Pearl Two - Page 115 - diyAudio
Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th December 2011, 08:07 PM   #1141
diyAudio Member
 
richluvsound's Avatar
 
Join Date: Sep 2010
Location: LONDON
Burnt finger tips from the solder braid and tired eyes .... tomorrow

Rich
  Reply With Quote
Old 9th December 2011, 08:30 PM   #1142
wayne is offline wayne  United States
diyAudio Member
 
Join Date: Jan 2002
Location: Northern California
Those voltages look OK about 5 mA through one fet. More fets will bring R9 voltage down. Maybe just add one at a time.
  Reply With Quote
Old 9th December 2011, 08:36 PM   #1143
diyAudio Member
 
richluvsound's Avatar
 
Join Date: Sep 2010
Location: LONDON
Quote:
Originally Posted by wayne View Post
Those voltages look OK about 5 mA through one fet. More fets will bring R9 voltage down. Maybe just add one at a time.
Cheers Wayne , I'll try that in the morning . Have a nice weekend

Rich
  Reply With Quote
Old 10th December 2011, 01:42 AM   #1144
6L6 is offline 6L6  United States
diyAudio Member
 
6L6's Avatar
 
Join Date: Oct 2010
Location: Denver, Colorado
I finally received my metalwork. The square holes for the PEM are always a hold up for me.
Anyway, here is a peek --

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.
To those of you looking at this photo and thinking that it makes much more sense to put the umbilical plug on the other side, you are absolutely correct. The machine shop drilled it upside down. Oh well, it's not that big of a deal.

Click the image to open in full size.

Click the image to open in full size.
  Reply With Quote
Old 10th December 2011, 07:08 AM   #1145
nar is offline nar
diyAudio Member
 
nar's Avatar
 
Join Date: Apr 2002
Location: near the sea
Very nice work. Please tell us when it's completed

I use the same power cons. Would you mind telling where I can find them on an online catalog, ot the name they have? I've bought mine to the local shop, but it closed definitely, so I would upgrade mine with a dual mono external supply ... There is a 7 pin version too, right ? That one is the 4 pin version.

Best,

nAr


Best,

nAr
__________________
"... Audio needs the thinnest wire ..." Rowan McCombe ... I hear it !!!
"Just 'cause they can't hear or sense it themselves doesn't mean you can't !" Allen Wright Allen was right ...
  Reply With Quote
Old 10th December 2011, 08:33 AM   #1146
diyAudio Member
 
richluvsound's Avatar
 
Join Date: Sep 2010
Location: LONDON
6,

I sent your bezels yesterday ... They are nice looking cases thats for sure !

Rich
  Reply With Quote
Old 10th December 2011, 11:08 AM   #1147
6L6 is offline 6L6  United States
diyAudio Member
 
6L6's Avatar
 
Join Date: Oct 2010
Location: Denver, Colorado
Nar - The connector is called a microphone jack, and I have only ever seen them in 4 and 5 pin versions. They are available at Radio Shack here in the US.

4-Pin Panel Mount Microphone Audio Jack - RadioShack.com

I need to buy another, I only have one, and swapped it between the panels for the top photos...
  Reply With Quote
Old 10th December 2011, 11:36 AM   #1148
nar is offline nar
diyAudio Member
 
nar's Avatar
 
Join Date: Apr 2002
Location: near the sea
Quote:
Originally Posted by 6L6 View Post
Nar - The connector is called a microphone jack, and I have only ever seen them in 4 and 5 pin versions. They are available at Radio Shack here in the US.

4-Pin Panel Mount Microphone Audio Jack - RadioShack.com

I need to buy another, I only have one, and swapped it between the panels for the top photos...
Thanks for the info 6L6

Best,

nAr
__________________
"... Audio needs the thinnest wire ..." Rowan McCombe ... I hear it !!!
"Just 'cause they can't hear or sense it themselves doesn't mean you can't !" Allen Wright Allen was right ...
  Reply With Quote
Old 10th December 2011, 02:06 PM   #1149
diyAudio Member
 
Join Date: Dec 2005
Location: St. Louis, MO
You can get XLR conectors with 3, 4, 5 or 6 pins - that would work too. For dual mono you really only need five pins....
  Reply With Quote
Old 10th December 2011, 02:11 PM   #1150
6L6 is offline 6L6  United States
diyAudio Member
 
6L6's Avatar
 
Join Date: Oct 2010
Location: Denver, Colorado
XLR connectors would be very good in this application, and the original design only needs 3 pins from the PSU to the RIAA chassis.

An entirely dual-mono PSU would be nice to make. I am considering a fully discrete regulator for this project, but only once I get the stock circuitry up and running. (And honestly, if I can get everything dead quiet, I am sure that I will not mess with it...)
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Another diy-pearl... lykkedk Pass Labs 18 15th June 2007 04:44 PM
ono or pearl PCB's mantisory Pass Labs 1 28th September 2006 11:12 PM
Pearl need help dzkh63 Pass Labs 1 26th September 2006 03:16 PM
WTB: Pearl PCB aire Pass Labs 1 26th February 2006 10:51 AM


New To Site? Need Help?

All times are GMT. The time now is 06:01 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2