Pass XP 20

giu_gio · 6th December 2009, 05:31 PM

Hello Everyone
I bought two days ago, the preamp XP20 and amplifiers
PASS XA 160.5.
I have two problems! The first: the volume knob does not change the value Db, I read on the display the current value 00. I change the volume only through the remote control.
What is broken in my Pre?
The second problem: I do not understand how to adjust the GAIN of the Pre. I press the MODE button, but you can access another menu. Who can explain the procedure? My XP 20 is s / n 2086667
Thank you all, forgive me my little English
Giuseppe
Italy

Nelson Pass · 6th December 2009, 10:41 PM

I would start by unplugging the AC power for a minute and
then plugging it back in. Occasionally the microcontrollers
will hang up.

If that doesn't do it, then I think you want to contact your
dealer for service.

giu_gio · 7th December 2009, 05:47 AM

Thanks you Mr. Pass!
the Microcontrollers unfortunately it snaps,
I will contact the service italian.
Best Regards
Giuseppe
Italy

Michele · 7th December 2009, 07:38 PM

Quote:

Originally Posted by giu_gio

Thanks you Mr. Pass!
the Microcontrollers unfortunately it snaps,
I will contact the service italian.
Best Regards
Giuseppe
Italy

I'd like to listen your system, next week I'll receive X160.5 monos

6th December 2009, 05:31 PM	#1
giu_gio diyAudio Member Join Date: Dec 2009 Location: Lanciano ( CH ) 66034 - Abruzzo Italy	Pass XP 20 Hello Everyone I bought two days ago, the preamp XP20 and amplifiers PASS XA 160.5. I have two problems! The first: the volume knob does not change the value Db, I read on the display the current value 00. I change the volume only through the remote control. What is broken in my Pre? The second problem: I do not understand how to adjust the GAIN of the Pre. I press the MODE button, but you can access another menu. Who can explain the procedure? My XP 20 is s / n 2086667 Thank you all, forgive me my little English Giuseppe Italy

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY Low Pass and Mid/High Pass (Bass Blocking) Filters	runslikealpaca	Everything Else	1	19th June 2009 10:59 PM
Paging Mr. Pass, Mr. Pass pull my finger please.	khundude	Pass Labs	2	5th December 2008 04:11 AM
Amperes of Pass amps & Pass for ESL	rick57	Pass Labs	3	4th August 2005 03:28 PM
pass aleph P VS pass X2 first version	perusicchio	Pass Labs	10	5th March 2004 10:06 AM
My opinion on Pass Labs and Mr. Pass (Nelson) himself	b_online	Pass Labs	11	21st May 2003 12:39 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

6th December 2009, 10:41 PM	#2
Nelson Pass The one and only Join Date: Mar 2001	I would start by unplugging the AC power for a minute and then plugging it back in. Occasionally the microcontrollers will hang up. If that doesn't do it, then I think you want to contact your dealer for service.

7th December 2009, 05:47 AM	#3
giu_gio diyAudio Member Join Date: Dec 2009 Location: Lanciano ( CH ) 66034 - Abruzzo Italy	Thanks you Mr. Pass! the Microcontrollers unfortunately it snaps, I will contact the service italian. Best Regards Giuseppe Italy

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)