Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

A question for Mr Pass on mosfet distortion
A question for Mr Pass on mosfet distortion
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 5th November 2009, 05:42 PM   #1
pro is offline pro  Italy
diyAudio Member
 
pro's Avatar
 
Join Date: Feb 2004
Location: Milano
Default A question for Mr Pass on mosfet distortion

In the article of Papa "Leaving Class A" in fig. 3 is there the figure of the distorsion for 7 bias current applied to a generic push-pull mosfet output stage. The question is: the measure are made on a simple push-pull follower like the one in fig. 1 or somethin different? at what frequency? what type of mosfet? Matched mosfet or a generic couple?
Can that measure be applied for reference to an output stage like the one in the picture below? The bias in this schematic is 200 mA per mosfet.

Click the image to open in full size.

Thank you.
Michele
__________________
Michele
  Reply With Quote
Old 5th November 2009, 09:04 PM   #2
Nelson Pass is offline Nelson Pass  United States
The one and only
 
Nelson Pass's Avatar
 
Join Date: Mar 2001
A question for Mr Pass on mosfet distortion
As I recall, it was simply an F4 output stage. The principles
apply pretty much to any Mosfet complementary followers.

  Reply With Quote
Old 5th November 2009, 09:36 PM   #3
pro is offline pro  Italy
diyAudio Member
 
pro's Avatar
 
Join Date: Feb 2004
Location: Milano
Thank you Mr Pass.
__________________
Michele
  Reply With Quote
Old 8th November 2009, 05:41 PM   #4
pro is offline pro  Italy
diyAudio Member
 
pro's Avatar
 
Join Date: Feb 2004
Location: Milano
Another question.
On the simulator the use of 3 couple of fets instead of just one seems to be worse for distortion, i think because of the lower bias for each fet (0.5A instead of 1.5A).
Is the situation different in the real world?
I mean, why the use of 3 couple instead of one?
How can this amp clip at more then 20V with just 22V on the rail?
Thank you.
__________________
Michele
  Reply With Quote
Old 8th November 2009, 06:25 PM   #5
Nelson Pass is offline Nelson Pass  United States
The one and only
 
Nelson Pass's Avatar
 
Join Date: Mar 2001
A question for Mr Pass on mosfet distortion
There are two effects which tend to cancel. The transconductance
of each Mosfet increases with current and the transconductance
of parallel devices is that of each divided by the number of devices.

The decision to use multiple devices usually has more to
do with maximum dissipation and current.

The amp output can be driven to within a couple of volts of
the rails unless the drive is limited, which it was not.

  Reply With Quote

Reply


A question for Mr Pass on mosfet distortionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
distortion...mosfet rtill Solid State 20 23rd February 2009 01:55 AM
FS Pass Amps Components in EU: MosFet + ZTX + 0.47ohm/3W + 22mF/35V snap-in caps massimo Swap Meet 3 14th January 2008 08:42 PM
Pass version of Citation 12 (Mosfet) G Solid State 13 10th November 2002 03:18 AM


New To Site? Need Help?

All times are GMT. The time now is 07:08 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki