I want to check the inverting stage of the Alpeh ono if its working ok. So i have made some voltage dropt measurements over resistors:
R65Left = 6398 mV, R65Right=642 mV
R64Left= 921 mV, R64Left=924 mV
R57Left = 5,90 V, R57Right=5,84V
R59Left= 4,33V, R59Right=4,33V
Could somebody confirm that this is ok ?
R65Left = 6398 mV, R65Right=642 mV
R64Left= 921 mV, R64Left=924 mV
R57Left = 5,90 V, R57Right=5,84V
R59Left= 4,33V, R59Right=4,33V
Could somebody confirm that this is ok ?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.