Need I say more? A60?

blank527 · 12th May 2003, 09:09 PM

Hi,

I currently finished my Aleph 60 and it sounds verrrry good!
There is a tight bass combined with much clarity.
My Pre-amp is unfortunatly not good, and build one from scratch, i'll try the BOSOZ.
These pictures where taken before I finished with the PCB.

blank527 · 12th May 2003, 09:11 PM

another

blank527 · 12th May 2003, 09:12 PM

yet again..

blank527 · 12th May 2003, 09:14 PM

...the back

blank527 · 12th May 2003, 09:15 PM

the last..for now

blank527 · 12th May 2003, 09:22 PM

The specs are..

-Dual mono block
-2X 625 VA Amplimo.. 2X25V
It is a rather small Aleph..the baseplate is 30x20cm
Height is 42x30cm..
It weighs 37kg
There is almost no hum, only when you put your ear very close to the speaker.
Capacitance per channel is 130.000uF... BC caps at 105C
All Silverwire connected.
The temp is bearable I can touch it for more than 7 seconds. (not measured it yet)
More questions? feel free to ask ofcourse

Nelson Pass · 12th May 2003, 09:28 PM

Verrrry professional. Want to put it in the gallery at
www.passdiy.com ?

Taco · 13th May 2003, 05:55 AM

Good Job!

I have 1 question, the topcover of your amp is that metal or acryl?

blank527 · 13th May 2003, 09:22 AM

Hi,

It is a real mirror.., from Xenos

I drilled holes in it.. it shines very good..
The front side are also mirrors.. wich give a nice blue effect when turned on..(also seen on tweaked computercases)
The back is stainless steel, wich is still with lots of scratches

Polishing that will be later on.
The cheapest part were the heatsinks

I got lucky with the price, the total was about 500,- euro
Greetzz,
Remco Blankesteijn

Raka · 15th May 2003, 09:13 AM

Congratulations!

Looks superb! Excelente!
Which speakers do you use with the aleph? Source? Kind of music?

15th May 2003, 09:13 AM	#10
Raka diyAudio Member Join Date: Aug 2002 Location: Close to Oistrakh	Nice Congratulations! Looks superb! Excelente! Which speakers do you use with the aleph? Source? Kind of music? __________________ What is beyond the speaker?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

12th May 2003, 09:22 PM	#6
blank527 diyAudio Member Join Date: Nov 2001 Location: Haarlem	The specs are.. -Dual mono block -2X 625 VA Amplimo.. 2X25V It is a rather small Aleph..the baseplate is 30x20cm Height is 42x30cm.. It weighs 37kg There is almost no hum, only when you put your ear very close to the speaker. Capacitance per channel is 130.000uF... BC caps at 105C All Silverwire connected. The temp is bearable I can touch it for more than 7 seconds. (not measured it yet) More questions? feel free to ask ofcourse

12th May 2003, 09:28 PM	#7
Nelson Pass The one and only Join Date: Mar 2001	Verrrry professional. Want to put it in the gallery at www.passdiy.com ?

13th May 2003, 05:55 AM	#8
Taco diyAudio Member Join Date: Nov 2002 Location: Place in the Netherlands	Good Job! I have 1 question, the topcover of your amp is that metal or acryl?

13th May 2003, 09:22 AM	#9
blank527 diyAudio Member Join Date: Nov 2001 Location: Haarlem	Hi, It is a real mirror.., from Xenos I drilled holes in it.. it shines very good.. The front side are also mirrors.. wich give a nice blue effect when turned on..(also seen on tweaked computercases) The back is stainless steel, wich is still with lots of scratches Polishing that will be later on. The cheapest part were the heatsinks I got lucky with the price, the total was about 500,- euro Greetzz, Remco Blankesteijn