I have 3X47000uf caps per rail and want to build either a CRCC or a CRCRC PSU. I have played with PSU Designer 2 and can get the ripple down to less than 10 mv with a 1ohm R between the first 2 caps and a .1ohm R between the next 2. What is acceptable ripple and is there an issue using larger value eg 1 ohm resistors ( Ihave 50v at the rails- so can live with the voltage drop and their 50w rating means that heat is not an issue). Any advice gratefully received.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.