cable for aleph-x

tze-hao yen · 5th April 2009, 12:49 AM

yes i find out that if you use two separate cable for + and - set of output the sound will be much better any body tried yet it has any thing to do with aleph-x is to closed between output and the feed back? so that we have count on the capacitance of the cable or any other factor ?

jupiterjune · 10th April 2009, 12:44 AM

Well, I've tried it with the input. I thought it sounded better than using an unshielded microphone cable to carry line level signals.

JJ

tze-hao yen · 10th April 2009, 12:55 AM

so you think it is because of the amp or because the way the cable wired ?

jupiterjune · 10th April 2009, 01:08 AM

as far as the input cable goes, unshielded microphone cable seems to have a lot of crosstalk between the wires. I could see it on my 'scope, and it was slightly out of phase.....

JJ

tze-hao yen · 10th April 2009, 01:12 AM

yes
????

they could canser each other in aleph-x and so you won't hear then at all .............but does it make the sound better?

5th April 2009, 12:49 AM	#1
tze-hao yen diyAudio Member Join Date: Jul 2004 Location: brooklyn	cable for aleph-x yes i find out that if you use two separate cable for + and - set of output the sound will be much better any body tried yet it has any thing to do with aleph-x is to closed between output and the feed back? so that we have count on the capacitance of the cable or any other factor ?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New in package Component Video Cable and Toslink Cable for sale cheap	jainbaby	Swap Meet	1	30th December 2007 05:18 PM
Which cable to use on Aleph internal wiring?	Sony	Pass Labs	4	25th May 2005 02:05 AM
Aleph's and what speaker cable???	bacworth	Pass Labs	6	6th January 2003 01:21 PM
Aleph vs capacitive(low inductance)cable	nar	Pass Labs	4	29th November 2002 03:02 PM
Aleph 2 Wiring/cable?	macka	Pass Labs	12	10th August 2002 04:12 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

10th April 2009, 12:44 AM	#2
jupiterjune diyAudio Member Join Date: Nov 2006	Well, I've tried it with the input. I thought it sounded better than using an unshielded microphone cable to carry line level signals. JJ

10th April 2009, 12:55 AM	#3
tze-hao yen diyAudio Member Join Date: Jul 2004 Location: brooklyn	so you think it is because of the amp or because the way the cable wired ?

10th April 2009, 01:08 AM	#4
jupiterjune diyAudio Member Join Date: Nov 2006	as far as the input cable goes, unshielded microphone cable seems to have a lot of crosstalk between the wires. I could see it on my 'scope, and it was slightly out of phase..... JJ

10th April 2009, 01:12 AM	#5
tze-hao yen diyAudio Member Join Date: Jul 2004 Location: brooklyn	yes ???? they could canser each other in aleph-x and so you won't hear then at all .............but does it make the sound better?