|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Mar 2003
Location: Barcelona
|
Hello to all,
I wanted him to explain to me the advantages and disadvantages of this power supply type Condenser-resistance-Condesador. Filter pi with resistance. Thank you. Angel |
|
|
|
|
#2 |
|
diyAudio Member
|
http://www.duncanamps.com/ has a tool you can use to simulate the effect of a CLC or CRC powersupply
|
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Mar 2003
Location: Barcelona
|
Hello Tazzy
Thank you for your comments. Angel. |
|
|
|
|
#4 |
|
diyAudio Member
Join Date: Mar 2003
Location: Barcelona
|
Hello Tazzy
My brother got simulate the circuit with the PSPICE EDA 8.0 and we chequed it with diferents configurations and we saw clear the diferens opions, today I put 18 capacitor, 9 for +Vcc and 9 for -Vcc, Its are 3300uF each type URZA manufacturer by Nippon Chemicon with the mains capacitor 150000uF each mixer with anothers small values, the change in the soud was formidable. The next week we add two more of 150000uF with the self. IŽll explain you the next experience with the new change. The Power Supply is very import for the sound. The Best Regards. Angel Puerto |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Split Voltage Switching Power Supply for Power Amp | vectorplane | Swap Meet | 2 | 23rd April 2011 11:48 PM |
| LTspice tool for power amp power supply component evaluation | andy_c | Software Tools | 2 | 23rd August 2009 05:10 PM |
| Can i use a computer power supply to power audio amplifiers? | destroyer X | Solid State | 91 | 25th September 2006 04:36 AM |
| selling high current power supply for power amps. | ericpeters | Swap Meet | 0 | 14th January 2005 02:21 PM |
| heater supply (xformer specs are 6.3V 2.5A) as supply for a power LED? | jarthel | Tubes / Valves | 10 | 21st July 2003 01:30 PM |
| New To Site? | Need Help? |
| Page generated in 0.07989 seconds (71.41% PHP - 28.59% MySQL) with 10 queries |