Zen Mod said:
whazzat ?
toaster ?
No, it's a control unit for pizza heater.
Certified up to 280C
Magura
Magura said:
No, it's a control unit for pizza heater.
Certified up to 280C
Magura
Attachments
luvdunhill said:fugly.com?
ZM: I hope you got my e-mail with voltages.. take your time though
yes , I got ... but I also got headache ( hehe , almost ) trying to solve all emails I didn't lately ....
this , or next evening ;
I must print that schematic , take a pen and calc .......
am I old , or am I just Old School ?
Magura said:
At least he didn't make it Fugly.dk
Magura
forgot to cut that line .... what's more important is name of the pic , when you save it
Magura said:Well, for those whom are still building amps, here's a pic of the CNC'ed boards, now finally ready for applying the solder mask.
Now the big decision is which colour to choose
Magura
Ya' nutz, making boards that way Cool job, though...
Green! I will say it again: green!!! The only colour you can look at forever You get tired of the reds and blues and blacks. Just take a look at the Drek boards. Mucho prettier than all the other stuff, in the long run.
steenoe said:
Ya' nutz, making boards that way Cool job, though...
Green! I will say it again: green!!! The only colour you can look at forever You get tired of the reds and blues and blacks. Just take a look at the Drek boards. Mucho prettier than all the other stuff, in the long run.
I guess turquoise will have to be the choice then Since I can't tell the difference anyway.
Actually this was the only way to get this sort of boards. They're 2 Oz copper on PTFE/glass fibre.
Magura
FastEddy said:Aside: Off topic re: transformer wiring. It worked! Works great! I wired the xformer so that primary and secondary both followed effectively, the same plan color scheme = rather than second guess the xformer maker. Thanks for the hints.
Now, what's wrong with you?
Can't you stay off topic?
Magura
Magura said:Note this photo has NOT been manipulated....that bird just looked real funny!
Magura
Please Magura,
Get your clothes back on.
(did that dreadful motor ever arrive?)
mpmarino said:
(did that dreadful motor ever arrive?)
Yes, thank you, I was wondering why you didn't reply.
Seems a mail has gotten lost
Are you still building stuff occasionally?
Magura
mpmarino said:Lost mail - wouldn't be the first time.
Naah - I'm not good enough yet. Maybe a month or two.
Soldering ought to be fine training, no?
A good excuse to build a Drek or something
Magura
All the audio stuff is shelved for the moment. I'm cleaning the shop and parts gathering right now to build meself one of those cnc tabletop mill/routers.
Going to do a steel frame and gantry (welded construction) so I can work some solid aluminum. Should be a fun project.
Going to do a steel frame and gantry (welded construction) so I can work some solid aluminum. Should be a fun project.
are you boyz on same high weed these days ........ hearing about home CNC from US of A and Denmark in few days isn't just coincidence ......
CY :
refresh my memory .... I hope it isn't something health related ?
CY :
I'm not good enough yet
refresh my memory .... I hope it isn't something health related ?
- Home
- Amplifiers
- Pass Labs
- The Pass Pub: The High-End Off Topic Thread