Zen vs ZV9

meanman1964 · 21st December 2008, 10:48 AM

I've a Zen amp the second edition and happy with the sound.I also want to build a ZV9 .I like to know what sound is of the ZV9 compared with the Zen.

Nelson Pass · 21st December 2008, 07:40 PM

It's a lot better....

meanman1964 · 21st December 2008, 08:04 PM

In what way do you mean?

Nelson Pass · 22nd December 2008, 01:18 AM

I mean that it's better by just about any criteria you name except
that it's a little more complicated.

Tea-Bag · 22nd December 2008, 01:40 AM

Quote:

Originally posted by meanman1964
I've a Zen amp the second edition and happy with the sound.I also want to build a ZV9 .I like to know what sound is of the ZV9 compared with the Zen.

MeanMan -
There is a group buy for F3 pcb boards at the below link, The F3 being a very close relative of the Zen V9. You may want to

it out.

F3-F5 PCB Group buy

meanman1964 · 22nd December 2008, 01:51 AM

Well I shall build the ZV9 then I'll know.I already have the boards of Peter Daniel and I also have the LU's and ZTX's

meanman1964 · 30th December 2008, 06:50 PM

Do the output fets of the ZV9 need to be matched?

Magura · 30th December 2008, 06:57 PM

No.

There is only one per channel.

Magura

meanman1964 · 30th December 2008, 07:29 PM

The ZV9 has 3 IRFP240 fets

Nelson Pass · 30th December 2008, 08:18 PM

One is the supply voltage filter, one is the current source from the
supply, and one is the cascode for the Jfet.

21st December 2008, 10:48 AM	#1
meanman1964 diyAudio Member Join Date: Oct 2006 Location: Belgium the land of chocolate	Zen vs ZV9 I've a Zen amp the second edition and happy with the sound.I also want to build a ZV9 .I like to know what sound is of the ZV9 compared with the Zen.

30th December 2008, 06:57 PM	#8
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	No. There is only one per channel. Magura __________________ Everything is possible....to do the impossible just takes a little while longer. www.class-a-labs.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

21st December 2008, 07:40 PM	#2
Nelson Pass The one and only Join Date: Mar 2001	It's a lot better....

21st December 2008, 08:04 PM	#3
meanman1964 diyAudio Member Join Date: Oct 2006 Location: Belgium the land of chocolate	In what way do you mean?

22nd December 2008, 01:18 AM	#4
Nelson Pass The one and only Join Date: Mar 2001	I mean that it's better by just about any criteria you name except that it's a little more complicated.

22nd December 2008, 01:51 AM	#6
meanman1964 diyAudio Member Join Date: Oct 2006 Location: Belgium the land of chocolate	Well I shall build the ZV9 then I'll know.I already have the boards of Peter Daniel and I also have the LU's and ZTX's

30th December 2008, 06:50 PM	#7
meanman1964 diyAudio Member Join Date: Oct 2006 Location: Belgium the land of chocolate	Do the output fets of the ZV9 need to be matched?

30th December 2008, 07:29 PM	#9
meanman1964 diyAudio Member Join Date: Oct 2006 Location: Belgium the land of chocolate	The ZV9 has 3 IRFP240 fets

30th December 2008, 08:18 PM	#10
Nelson Pass The one and only Join Date: Mar 2001	One is the supply voltage filter, one is the current source from the supply, and one is the cascode for the Jfet.