"Output" resistors(quick Q)?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
your choice

hi mats,
it´s up to you, even 2 0R33 parallel is ok as long as
their power handling ability is twice as high as the possible
power they have to handle.
Example:
10A x 1.65V = 16.5W -> each resistor should be 15W + to
be on the safe side.
You can calculate maximum current thru these resistors by
bias current divided by (1 - current gain of the CCS)
ALEPH2: 3 / (1 - 0.69) = 3 / 0.31 = 9.68 A.

Uli:nod: :nod: :nod:
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.