Best amp choice for driving NASTY speaker loads - diyAudio
Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th March 2003, 03:36 PM   #1
diyAudio Member
 
stokessd's Avatar
 
Join Date: Nov 2002
Location: Grantham, NH
Default Best amp choice for driving NASTY speaker loads

As some of you may know, I'm a big fan of electrostatic loudspeakers. I've been repairing the Quad ESL and Quad ESL-63 for about 10 years now. Last fall I finally got off my butt and built a set of hybrid ESL's which are quite satisfying. The problem is that they are very nasty reactive loads; see:

http://quadesl.com/speaker/diyesl/co..._impedance.gif

I've been a tube and tube amplifier fanatic for quite some time (with forays into solid state design). But with the amazing resolving power of these speakers, I'm hearing colorations in my source components like never before (the quads come with rose colored glasses, so tubes tend to be a bit more of the same). I'm now thinking that a low distortion, but polite solid state amplifier would be just the ticket.

I have been using a set of rebuilt Heath W5M's on the panels, and a Pass Aleph 3 on the bass modules (I know, it's a crime to use such a great amp only on the bass).

Currently the Aleph doesn't sound nearly as good on the panels as the Heaths (or citation II or Citation V) or a first generation Adcom 555. I've used the Aleph on less nasty loads and I know it's an amazingly good amplifier, that should be at the top of that list.

So my question is, given my nasty load situation, which pass design (or amplifier design in general) would you guys recommend?

I have been seriously thinking of the Citation 12 design (I've already got a citation 12 earmarked for it); it looks like it would be stable into reactive loads, has a simple short signal path, and strikes me as an all around good design.

Thanks,
Sheldon
  Reply With Quote
Old 25th March 2003, 04:20 PM   #2
SY is offline SY  United States
diyAudio Moderator
 
SY's Avatar
 
Join Date: Oct 2002
Location: Chicagoland
Blog Entries: 1
It doesn't look THAT nasty; no dips to 1 ohm or weird drive angles. That 555 ought to work very well indeed.

What kind of voltage does it take to arc the panels? If they can take more than the Quad, this might be a good candidate for a Circlotron-type OTL. Or you can wait until summer, when my direct-drive ESL amp is up and running and try that out...
__________________
And while they may not be as strong as apes, don't lock eyes with 'em, don't do it. Puts 'em on edge. They might go into berzerker mode; come at you like a whirling dervish, all fists and elbows.
  Reply With Quote
Old 25th March 2003, 04:22 PM   #3
jleaman is offline jleaman  Belgium
Banned
 
Join Date: Apr 2002
Send a message via AIM to jleaman
I think that i will be contacting you tonight to get some questions answered. Id like to try to build a pair of these Pannels.
  Reply With Quote
Old 25th March 2003, 05:25 PM   #4
diyAudio Moderator Emeritus
 
roddyama's Avatar
 
Join Date: Jan 2002
Location: Michigan
I think I remember comments on the forum that the Pass A40 did a good job on electrostats. I'll try a search and see what I can find.

Rodd Yamashita
  Reply With Quote
Old 25th March 2003, 06:01 PM   #5
Electrons are yellow and more is better!
diyAudio Member
 
peranders's Avatar
 
Join Date: Apr 2002
Location: Göteborg, Sweden
Blog Entries: 4
Quote:
Originally posted by SY
It doesn't look THAT nasty; no dips to 1 ohm or weird drive angles. That 555 ought to work very well indeed.
Exactly, what is nasty about this curve? Any normal amp should be able to drive this speaker.
__________________
/Per-Anders (my first name) or P-A as my friends call me
Super Regulator SSR03 Group buy. Still time for signing up.
  Reply With Quote
Old 25th March 2003, 07:03 PM   #6
dhaen is offline dhaen  Europe
diyAudio Moderator Emeritus
 
dhaen's Avatar
 
Join Date: Jun 2002
Location: U.K.
Hi,

No advice, sorry, just some comment:

Sheldon,

I've watched your pages for a year with interest, and learned a lot. Thank you.

SY,

I'm "all ears" for your ES direct-drive system. I'm sure it'll be worth the wait.

Cheers,
  Reply With Quote
Old 25th March 2003, 08:31 PM   #7
The one and only
 
Nelson Pass's Avatar
 
Join Date: Mar 2001
I don't consider electrostats as nasty loads. They do often dip to a low impedance above 10 KHz, but the energy up there is low enough that it's not a problem for a stable amplifier.

Electrostatic speakers do want voltage, however, and it's usually wise to have a reasonable 8 ohm power to get them going.
  Reply With Quote
Old 25th March 2003, 10:39 PM   #8
diyAudio Member
 
Join Date: Jan 2002
Location: Puget Sound
I notice some amps claim doubling as the impedence is halved while other amps don't quite double.

Going by this alone, which amp would be better suited to an ESL load?

Curiously, Mr. Stokes didn't like the Aleph 5 on his ESL. What could be done to an amplifier design such as an Aleph or Zen to make it more sound better with ESLs?

I'm a bit confused by all of this so much so that I don't know how to ask the right questions let alone understand the answers.
  Reply With Quote
Old 26th March 2003, 12:32 AM   #9
diyAudio Member
 
stokessd's Avatar
 
Join Date: Nov 2002
Location: Grantham, NH
Sy-

The load is almost entirely reactive (inductive at low frequencies, capacitive at higher frequencies). I had a fellow Albuquerque Speaker Society member bring over a big pair of Cary SET's and they sounded awful and at higher than quiet levels it sounding like it was clipping badly. Don't let that smoothly rising and falling impedance lull you into a false sense of security, those things really are nasty to drive.

My panels have 1/8" stator spacing and powder coated stators, you can't push enough power through them to arc. You've got 3mm Xmax and the same Sd as 24 8" woofers. This isn't your dad's quads. I'd like to see what you come up with in the ESL amplifier department.

Peranders-

yes, you'd think any amp would drive it, but lots seem to have problems.

Nelson-

Compared to your ionic speaker, I'd say ESL's are a walk in the park. Interestingly, these ESL panels are about 90 dB/watt at one meter. Looking at the speaker inputs with a scope, even my 20 watt W5M's drive them to a lot louder volumes than I need before the amps clip. But you are right, tube amp damping factors are crappy at best, and I can't help but think with such a reactive load, the more control I have over the speaker the better.

Ultrachrome-

I have an aleph 3, and it sounds veiled and rolled off at the top end. Before I had the shunt resistors on the speaker to tame the rising response, the aleph 3 would sound like it was clipping at low to moderate listening volumes.


That's the problem I've got, the aleph designs are great for cone and domes (or at least all speakers which aren't mine), and if my aleph 3 is an indication, that topology isn't working so well for me. So I've got to head down a different path.

Thanks for all the inputs.

Sheldon
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
When driving low impedance loads, what is the killer? - Prevention? CBRworm Solid State 25 6th April 2009 02:09 PM
Behringer DEQ ok driving multiple loads brucemck2 Subwoofers 0 18th January 2006 10:49 PM
Driving Low Impedance Loads weinstro Solid State 14 8th May 2005 10:53 PM
Gainclone driving inductive loads diyman Chip Amps 1 12th April 2004 10:53 AM
Zen driving high impedance loads supa-roo Pass Labs 2 18th April 2003 08:23 PM


New To Site? Need Help?

All times are GMT. The time now is 12:22 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2