transformer voltage needed for Aleph 4 or Aleph 2
 User Name Stay logged in? Password
 Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read Search

 Pass Labs This forum is dedicated to Pass Labs discussion.

 Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
 26th November 2001, 03:17 PM #1 diy student diyAudio Member   Join Date: Aug 2001 Location: Indiana I was wondering what transformer output voltage would be suitable to create the +/- 48 volts needed on an Aleph 4 or the +/- 45 volts for an Aleph 2. Would a transformer with dual 30 volt secondaries with 4 37.5 volt taps work? Thanks for the advise. Rob
 26th November 2001, 03:36 PM #2 GRollins   diyAudio Member   Join Date: Feb 2001 Location: Columbia, SC Rob, The formula is 1.414*AC=rail for a capacitor input filter. The one caveat here is that you'll have to add a volt or two for diode losses in the rectifier. So for a 45V rail, you're looking at roughly a 33-0-33V secondary. For a 48V rail, about 35-0-35V. Note that the voltage need not be exactly 45V or 48V. The cicuit will be perfectly happy with anything within shouting distance of that range. Just be sure that you've got adequate heatsinking if you choose to run the circuit a bit hot. Grey
 26th November 2001, 06:01 PM #3 diy student diyAudio Member   Join Date: Aug 2001 Location: Indiana Thanks so much for the input. By the way, what does it mean to say that the transformer has 30 volt secondaries, but 37.5 volt taps? I thought secondaries and taps would be the same thing. Rob
 26th November 2001, 06:21 PM #4 diy student diyAudio Member   Join Date: Aug 2001 Location: Indiana Grey the equation you provided is that for a single secondary or a dual secondary or does it even matter? So if I would use the transformer with the dual 30 volt secondaries would I get 42 volt rails before subtracting the volt or two for diodes in the rectifier? How will this affect the amps output power, and approximately to what degree? Thanks. Rob
 26th November 2001, 06:25 PM #5 diy student diyAudio Member   Join Date: Aug 2001 Location: Indiana I think I was miss reading and looking at secondaries and taps for two different transformers. Sorry about that.
 26th November 2001, 07:14 PM #6 jduncan   diyAudio Member   Join Date: Nov 2001 Location: Boston, MA, USA The engineer at plitron was trying to tell me that I needed a different set for that...I'm building an Aleph 4 and want roughly 48V rails but he said that to get that I should use the one with dual 27V secondaries ....he said this would give me what I wanted.... I however, initially thought that I needed 35V secondaries too.... Could you please confirm that I really do need 35V instead of 27V?
 26th November 2001, 10:47 PM #7 GRollins   diyAudio Member   Join Date: Feb 2001 Location: Columbia, SC The 1.414*AC is per rail, i.e. a 30-0-30VAC transformer would give 42.42-0-42.42VDC, not including diode losses, capacitor leakage, and a bit of resistive loss here and there. The actual rail would work out about 40-41V or so. Please note that a sufficient current draw will pull the rail down even further, but if you keep it reasonable (50-60% of the VA rating of the transformer or less), the rail will actually end up pretty close to the calculations. Don't sweat a half volt difference. We're also assuming a fair sized bank of caps. Try to save money on the caps, and the rail will collapse sooner, not to mention ripple problems. Grey
 26th November 2001, 11:14 PM #8 jduncan   diyAudio Member   Join Date: Nov 2001 Location: Boston, MA, USA OK great, so for my Aleph 4's I have a 1000VA transformer with dual 35V secondaries and a capacitor bank of .2F (6 * 33,000uF) ....this should be great right?
 26th November 2001, 11:20 PM #9 cp642 diyAudio Member   Join Date: Aug 2001 right! The engineer at plitron has taken you for a ride..or.... he's assuming that you're building an aleph 5?
 26th November 2001, 11:28 PM #10 jduncan   diyAudio Member   Join Date: Nov 2001 Location: Boston, MA, USA nah, i even sent him the schematic!

 Posting Rules You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules
 Forum Jump User Control Panel Private Messages Subscriptions Who's Online Search Forums Forums Home Site     Site Announcements     Forum Problems Amplifiers     Solid State     Pass Labs     Tubes / Valves     Chip Amps     Class D     Power Supplies     Headphone Systems Source & Line     Analogue Source     Analog Line Level     Digital Source     Digital Line Level     PC Based Loudspeakers     Multi-Way     Full Range     Subwoofers     Planars & Exotics Live Sound     PA Systems     Instruments and Amps Design & Build     Parts     Equipment & Tools     Construction Tips     Software Tools General Interest     Car Audio     diyAudio.com Articles     Music     Everything Else Member Areas     Introductions     The Lounge     Clubs & Events     In Memoriam The Moving Image Commercial Sector     Swap Meet     Group Buys     The diyAudio Store     Vendor Forums         Vendor's Bazaar         Sonic Craft         Apex Jr         Audio Sector         Acoustic Fun         Chipamp         DIY HiFi Supply         Elekit         Elektor         Mains Cables R Us         Parts Connexion         Planet 10 hifi         Quanghao Audio Design         Siliconray Online Electronics Store         Tubelab     Manufacturers         AKSA         Audio Poutine         Musicaltech         Aussie Amplifiers         CSS         exaDevices         Feastrex         GedLee         Head 'n' HiFi - Walter         Heatsink USA         miniDSP         SITO Audio         Twin Audio         Twisted Pear         Wild Burro Audio

 Similar Threads Thread Thread Starter Forum Replies Last Post stoN_Cold Pass Labs 4 10th September 2007 10:16 AM bbakota2000 Pass Labs 2 15th March 2004 06:25 PM Zapped Pass Labs 10 7th December 2003 06:33 AM Michael Rothacher Pass Labs 12 30th June 2003 01:03 PM kristijan-k Swap Meet 64 12th September 2002 07:55 AM

 New To Site? Need Help?

All times are GMT. The time now is 07:33 PM.