X1 voltage swap

[guy255389]

Hello,

Can anyone confirm how to change a 120V X1 to accept UK voltage (240V)?

Picture of the circuit board is attached. It looks like you remove the left and top jumpers and insert a diagonal one between orange and red. The work will be done by a qualified technician; I just need to make 100% sure. I didn't get much help from info@passlabs btw

Many thanks for your time

http://www.zshare.net/image/13945758edccd286/

 

[Zen Mod]

Hello,

Can anyone confirm how to change a 120V X1 to accept UK voltage (240V)?

Picture of the circuit board is attached. It looks like you remove the left and top jumpers and insert a diagonal one between orange and red. The work will be done by a qualified technician; I just need to make 100% sure. I didn't get much help from info@passlabs btw

Many thanks for your time

http://www.zshare.net/image/13945758edccd286/

when customer is trying to find information for technician , something is wrong .......

who needs to be qualified here ?

you or technician ?

leave to a man to do what's his biz ; exactly doing what you sayed , and remeasuring with ohmmeter .......... to be sure that Rdc of primary is in ballpark .

 

[georgehifi]

For 240v operation this this what you replicate, 2 jumpers only as it says in those positions that are in yellow. But if you couldn't see that for yourself maybe leave it up to someone who can.

Cheers George

 

[guy255389]

nicely. thanks very much