Aleph X

peter7 · 31st May 2008, 03:18 AM

Hello , can i put +-35VDC to run Aleph X ??

Nelson Pass · 31st May 2008, 03:28 AM

Of course. You can figure that this will make for approximately
200 watts/ch, with an idle dissipation approaching 600 watts,
so you want to use a 2 KW transformer per channel, and provide
enough outputs and heat sink for 600 watts at a max of 25 watts
per output device and a sink temperature at about 25 deg C above
ambient temperature.

peter7 · 31st May 2008, 03:10 PM

wow !! Thank you Nelson!! I thank I will make a big big machine!!

Nelson Pass · 31st May 2008, 04:07 PM

That's the ticket.

space2000 · 12th June 2008, 12:42 PM

hi Nelson Pass,

i am bit lost as i have seen many aleph x z, aleph x100 aleph a100 sand so on....which is the correct one is yours own design and output is 100wrms into 8ohms?

thank you for healping me. i just want your original design with 100wrms output.

where can i find circuit diagram with build info.

best regards
michael

31st May 2008, 03:18 AM	#1
peter7 diyAudio Member Join Date: Apr 2005 Location: hong kong	Aleph X Hello , can i put +-35VDC to run Aleph X ??

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	13	27th April 2012 02:13 AM
Aleph (Single Ended) + Larvadin (no Memory Distortion) = Ultimate Aleph?	tiefbassuebertr	Pass Labs	17	9th January 2012 02:10 PM
Mini Aleph Board & Aleph 2 Parts List	gpsmithii	Pass Labs	3	16th January 2010 03:58 AM
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions	tiefbassuebertr	Pass Labs	0	6th August 2009 11:11 AM
PCBs for Aleph 2, Aleph 3, Aleph 4 and Aleph 5 amplifiers	kristijan-k	Swap Meet	64	12th September 2002 07:55 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st May 2008, 03:28 AM	#2
Nelson Pass The one and only Join Date: Mar 2001	Of course. You can figure that this will make for approximately 200 watts/ch, with an idle dissipation approaching 600 watts, so you want to use a 2 KW transformer per channel, and provide enough outputs and heat sink for 600 watts at a max of 25 watts per output device and a sink temperature at about 25 deg C above ambient temperature.

31st May 2008, 03:10 PM	#3
peter7 diyAudio Member Join Date: Apr 2005 Location: hong kong	wow !! Thank you Nelson!! I thank I will make a big big machine!!

31st May 2008, 04:07 PM	#4
Nelson Pass The one and only Join Date: Mar 2001	That's the ticket.

12th June 2008, 12:42 PM	#5
space2000 diyAudio Member Join Date: Mar 2008	hi Nelson Pass, i am bit lost as i have seen many aleph x z, aleph x100 aleph a100 sand so on....which is the correct one is yours own design and output is 100wrms into 8ohms? thank you for healping me. i just want your original design with 100wrms output. where can i find circuit diagram with build info. best regards michael

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)