diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   ZV5 PS layout question (http://www.diyaudio.com/forums/pass-labs/123617-zv5-ps-layout-question.html)

seventenths 23rd May 2008 10:24 PM

ZV5 PS layout question
 
Salutations,
I'm working on a ZV5 stand-alone power supply and I have a layout question regarding the inductors.
Is coil placement and orientation critical in a stand-alone implementation? ?... somewhat critical? Are there any good rules of thumb to live by?

Thank you,
7/10

john65b 23rd May 2008 10:54 PM

I don't have too much advice to offer...

But I built the amp exact as designed (bobo Zen V5), but for the power supply, I chose to experiment a little...as I didn't have all the required parts

I am actually using two 19VDC, 3.2A Laptop Switch Mode Power Supplies per channel (4 laptop power supplies total for 2 channels) feeding a pair of two 10,000uF caps/channel.

Sound seems clear and good. Nice compact build.

I guess if the power supply is clean and stable, try it.

Nelson Pass 24th May 2008 07:12 PM

Keep the coils away from the input circuit.

seventenths 24th May 2008 08:08 PM

Thank you Gentlemen. As this is a stand-alone supply, I should be in great shape then :D


7/10


All times are GMT. The time now is 11:33 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2