Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 22nd November 2001, 04:40 AM   #1
diyAudio Member
 
john-china's Avatar
 
Join Date: Feb 2001
Location: where fair living
what volt(ac) secondaries will be good in choosing transformer of aleph1.2. in schematic of aleph1.2, it is
60v(dc). so what rate is it ac to dc after rectifier and filter capacitors when the tansformer is at the state of high output current?
__________________
Maybe i should not be lazy again
  Reply With Quote
Old 22nd November 2001, 05:08 AM   #2
diyAudio Member
 
Join Date: Aug 2001
For 60VDC you might want to try a minimum of 45VAC sec. transformer as current draw and rectifier loses will have you end up with less than 60VDC.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Aleph1.7 nickgreek Pass Labs 35 14th May 2013 07:23 PM
aleph1.2 IRF240 vs IRFP250 klimo_67 Pass Labs 20 8th April 2010 02:17 PM
Aleph1.2 clone trouble oblerum Pass Labs 4 9th September 2008 02:55 AM
aleph1.2 klimo_67 Pass Labs 2 22nd March 2007 09:58 AM
Wonted schematics of aleph1 sasha Pass Labs 13 14th August 2002 05:20 AM


New To Site? Need Help?

All times are GMT. The time now is 06:34 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2