zen #9 WIP

gionag · 26th April 2008, 01:18 AM

HI !

this is my progressions in building Zen #9.

The pcb was printed from the PDDA pcb's.

Here how they look:

There missing some components

And i have a question about the "C6" cap on the attached schematic file.
Does this kind of cap fit well ? it's the right type ? (i used a 63V, but a 100V is reccomended):

i've installed under the pcb, there:

thanks for support !
Michele

gionag · 27th April 2008, 12:32 AM

anybody can give me a suggest about this CAP ? this is a polyprop. but a friend suggest me to use a metal film one.

What do you think ?!

thanks

jacco vermeulen · 27th April 2008, 12:51 AM

The cap is ok, no need for 100V.

Nice looking boards you've got there

gionag · 27th April 2008, 01:13 AM

thank you... i'm looking for something good in sound and beauty (like aston martin spot...).

ok for 63Volt...

Soon with new upgrades !

gionag · 30th April 2008, 11:45 PM

the construction in going on slowly but today, I received a gift from italsistemi.

Look there and say Wow

this is the 2 x 300VA toroid for left and right monoblocks. The smaller one is the 50VA for the BoZ that i'm building parallely.

In detail, they attached to surround of toroid a tin metal slice for reducing electromagnetic emissions:

Now i have to find money to complete tasks (i'm a poor diyer

). This project had k'napped me.

Magura · 1st May 2008, 12:00 AM

Looks nice. What else are you lacking to get on with the project? It can't be a matter of that much money for this amp

Magura

gionag · 1st May 2008, 12:10 AM

Only one single stupid word : I'M A STUDENT

STUDENT = NO MONEY , NO TIME !

Magura · 1st May 2008, 12:19 AM

Quote:

Originally posted by gionag
Only one single stupid word : I'M A STUDENT

STUDENT = NO MONEY , NO TIME !

So, which parts are you lacking ?

Magura

gionag · 1st May 2008, 12:25 AM

lacking = missing ? (i'm sorry but my english is so poor).

i need 8x 10.000uf 63VOLT, 2x lu1014D and some stupid resistor.

for the pre, instead, i need the irf610 (i have bought a wrong model) and the resistors...

gionag

Magura · 1st May 2008, 11:46 AM

Yes, lacking=missing

If you make a list, I'm sure some of us could help you out, after all, we have a huge stash (well some of us has) of surplus parts.

Magura

26th April 2008, 01:18 AM	#1
gionag diyAudio Member Join Date: Jun 2007	zen #9 WIP HI ! this is my progressions in building Zen #9. The pcb was printed from the PDDA pcb's. Here how they look: There missing some components And i have a question about the "C6" cap on the attached schematic file. Does this kind of cap fit well ? it's the right type ? (i used a 63V, but a 100V is reccomended): i've installed under the pcb, there: thanks for support ! Michele

27th April 2008, 12:51 AM	#3
jacco vermeulen diyAudio Member Join Date: Oct 2004 Location: At the sea front, just under Rotterdam	The cap is ok, no need for 100V. Nice looking boards you've got there __________________ Looks like Sponge Bob has killed another thread.

1st May 2008, 12:00 AM	#6
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	Looks nice. What else are you lacking to get on with the project? It can't be a matter of that much money for this amp Magura __________________ Everything is possible....to do the impossible just takes a little while longer. www.class-a-labs.com

1st May 2008, 11:46 AM	#10
Magura diyAudio Member Join Date: Oct 2003 Location: Denmark, Viborg	Yes, lacking=missing If you make a list, I'm sure some of us could help you out, after all, we have a huge stash (well some of us has) of surplus parts. Magura __________________ Everything is possible....to do the impossible just takes a little while longer. www.class-a-labs.com

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

27th April 2008, 12:32 AM	#2
gionag diyAudio Member Join Date: Jun 2007	anybody can give me a suggest about this CAP ? this is a polyprop. but a friend suggest me to use a metal film one. What do you think ?! thanks

27th April 2008, 01:13 AM	#4
gionag diyAudio Member Join Date: Jun 2007	thank you... i'm looking for something good in sound and beauty (like aston martin spot...). ok for 63Volt... Soon with new upgrades !

30th April 2008, 11:45 PM	#5
gionag diyAudio Member Join Date: Jun 2007	the construction in going on slowly but today, I received a gift from italsistemi. Look there and say Wow this is the 2 x 300VA toroid for left and right monoblocks. The smaller one is the 50VA for the BoZ that i'm building parallely. In detail, they attached to surround of toroid a tin metal slice for reducing electromagnetic emissions: Now i have to find money to complete tasks (i'm a poor diyer ). This project had k'napped me.

1st May 2008, 12:10 AM	#7
gionag diyAudio Member Join Date: Jun 2007	Only one single stupid word : I'M A STUDENT STUDENT = NO MONEY , NO TIME !

1st May 2008, 12:25 AM	#9
gionag diyAudio Member Join Date: Jun 2007	lacking = missing ? (i'm sorry but my english is so poor). i need 8x 10.000uf 63VOLT, 2x lu1014D and some stupid resistor. for the pre, instead, i need the irf610 (i have bought a wrong model) and the resistors... gionag

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read