diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Pass Labs (http://www.diyaudio.com/forums/pass-labs/)
-   -   blow r27 and r28 mini aleph (http://www.diyaudio.com/forums/pass-labs/121213-blow-r27-r28-mini-aleph.html)

ricrado 12th April 2008 12:06 PM

blow r27 and r28 mini aleph
 
Hi:

I connect my mini aleph ,brianGT board and blew r27 ,r28,r19 and r20.
Any sugestions.?

The first time it sound marvelous.
And now this happens.
in both channels.

ricardo

GRollins 15th April 2008 04:57 AM

At the rate this is going, I'll have to get myself a copy of that schematic. Seems that everybody and his brother has a 'Mini-A'...except that they all changed things around from what I did when I first posted the circuit. That's not necessarily bad, but it sure is confusing.
Just guessing...are R19, R20, R27, and R28 the resistors at the Sources of the MOSFETs and the output sense array?
If so, did you use 3W resistors?
Were you playing at full power? (Remember, 10W isn't 100W...full power comes earlier than you might expect. The Mini-A ain't a rock-n-roll amp.)
Were there any odd noises prior to failure?
Do you have an oscilloscope?

Grey

ssmith 15th April 2008 09:43 AM

2 Attachment(s)
Here is the BrianGT schematic

ssmith 15th April 2008 09:49 AM

2 Attachment(s)
and here is the stuffing list (note that when Excel/OpenOffice Calc opens the file, there is a tab at the bottom to choose the Mini-Aleph).

R27, R28 = 0,47 3W
R19 = 221
R20 = 1.00K


All times are GMT. The time now is 09:07 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2