Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Pass Labs This forum is dedicated to Pass Labs discussion.

Aleph P+Aleph 3+ Aleph 3
Aleph P+Aleph 3+ Aleph 3
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 2nd April 2008, 03:22 PM   #1
spersanti276 is offline spersanti276  Italy
diyAudio Member
 
Join Date: Jun 2004
Location: roma
Default Aleph P+Aleph 3+ Aleph 3

Hallo,

do you think it's possible (and a good choice too) to drive two

Aleph 3 in a passive (horizontal or vertical) biamping with an

Aleph P? I know, the power amps have 23Kohm and 1,55 volt

input each (I think the preamp will "see" only 11,5Kohm!) so the

Aleph P needs to have a strong out , maybe more mA, than we

usually see in other preamps, maybe nothing of tube-type kind.

Am I wrong? And what about the balanced/unbalanced

mismatch?

Thank you and excuse me for my bad english.

Stefano.
  Reply With Quote
Old 2nd April 2008, 03:44 PM   #2
Zen Mod is online now Zen Mod  Serbia
Official Court Jester
diyAudio Member
 
Zen Mod's Avatar
 
Join Date: Jan 2003
Location: ancient Batsch , behind Iron Curtain
Aleph P+Aleph 3+ Aleph 3
Default Re: Aleph P+Aleph 3+ Aleph 3

Quote:
Originally posted by spersanti276
Hallo,

do you think it's possible (and a good choice too) to drive two

Aleph 3 in a passive (horizontal or vertical) biamping with an

Aleph P? I know, the power amps have 23Kohm and 1,55 volt

input each (I think the preamp will "see" only 11,5Kohm!) so the

Aleph P needs to have a strong out , maybe more mA, than we

usually see in other preamps, maybe nothing of tube-type kind.

Am I wrong? And what about the balanced/unbalanced

mismatch?

Thank you and excuse me for my bad english.

Stefano.

good choice ; nothing to worry about
__________________
my Papa is smarter than your Nelson !
clean thread; Cook Book;PSM LS Cook Book;Baby DiyA ;Mighty ZM's Bloggg;Papatreasure;Papa...© by Mighty ZM
  Reply With Quote
Old 2nd April 2008, 07:02 PM   #3
saperusa is offline saperusa  Italy
diyAudio Member
 
Join Date: Apr 2008
Location: Italy
Yes is possible and the best way in my opinion is to connect by XLR in vertical mode the biampling of the aleph3.
In other words you take the pin 2 and ground and connect to an rca the other on pin3 and ground to another rca.
The two rca complete one channel (left or right) of the XLR and goes to the left and right channel of one pass aleph3.
The power is normal for the rca (1-2) and change fot the rca(1-3) because it's the (-) signal.
In this way you drive in balanced mode the aleph p just for the reason that you have two aleph3.
When You listen the difference you will see....


Bye

Sandro (saperusa)
  Reply With Quote
Old 3rd April 2008, 01:12 PM   #4
spersanti276 is offline spersanti276  Italy
diyAudio Member
 
Join Date: Jun 2004
Location: roma
And what about the correct connection between Aleph P and two Aleph 3 in "horizontal" passive biamping? Is it possible?
I think that another way of using the passive biamp is to pre-filter (with simple 6/db-oct.) the amp that drives the tweeters.
Maybe I'll have less dinamic than with the vertical biamp but the intermodulation between tweeter and woofer will be absolutely zero.
I'm thinking about this because I have hpd 12" Tannoy (95 db eff./almost 1000hz crossed with 6db-oct./an "easy" impedance curve) so I don't need so much power but,eventually, better control,more dinamic,less distortion in general...
All the people that have good Tannoys say that biamping is the way to go.

Thanks a lot.

Stefano
  Reply With Quote

Reply


Aleph P+Aleph 3+ Aleph 3Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aleph (Single Ended) + Larvadin (no Memory Distortion) = Ultimate Aleph? tiefbassuebertr Pass Labs 20 7th April 2018 11:04 AM
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions tiefbassuebertr Pass Labs 27 11th November 2017 01:13 PM
Mini Aleph Board & Aleph 2 Parts List gpsmithii Pass Labs 3 16th January 2010 03:58 AM
First version Aleph 0 (Null, ZERO, O, Os, 0s) versus later Aleph versions tiefbassuebertr Pass Labs 0 6th August 2009 11:11 AM
PCBs for Aleph 2, Aleph 3, Aleph 4 and Aleph 5 amplifiers kristijan-k Swap Meet 64 12th September 2002 07:55 AM


New To Site? Need Help?

All times are GMT. The time now is 11:10 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki