Wtb Boz Pcb. - diyAudio
Go Back   Home > Forums > Amplifiers > Pass Labs

Pass Labs This forum is dedicated to Pass Labs discussion.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 27th March 2008, 07:13 PM   #1
diyAudio Member
 
sandstorm33's Avatar
 
Join Date: Sep 2006
Default Wtb Boz Pcb.

Am in search for a Bride of Zen Pre PCB. I would buy Audio Expess Board but have had poor experience with them.

I bet you there is one floating out there in DIY Limbo!!!
  Reply With Quote
Old 27th March 2008, 09:32 PM   #2
diyAudio Member
 
sandstorm33's Avatar
 
Join Date: Sep 2006
BUMP!!
  Reply With Quote
Old 27th March 2008, 11:22 PM   #3
diyAudio Member
 
sandstorm33's Avatar
 
Join Date: Sep 2006
BUMP
  Reply With Quote
Old 28th March 2008, 03:33 AM   #4
diyAudio Member
 
Join Date: Feb 2003
Location: Chicago, Illinois
Default BOZ pcb

Sandstorm, you have an email.
__________________
picker
  Reply With Quote
Old 28th March 2008, 01:12 PM   #5
gionag is offline gionag  Italy
diyAudio Member
 
Join Date: Jun 2007
i need the same thing

what is audio express pcb ??

thanks
  Reply With Quote
Old 28th March 2008, 02:10 PM   #6
diyAudio Member
 
vdi_nenna's Avatar
 
Join Date: Oct 2000
Location: PA, USA
Blog Entries: 1
Send a message via Yahoo to vdi_nenna
Quote:
what is audio express pcb ??
AudioXpress.com have boards for some Pass projects.
However, they are not very good boards, especially if you remove a part (desolder). The trace on the board sometimes lifts off with the part being removed. I experienced this myself.

Try making your own board. I used photo paper with a laser printer to create an image of the board trace for my Zen 9.
It came out pretty good. Then use etchant to process the trace.

http://www.headwize.com/projects/garbz2_prj.php

good luck!

Vince
  Reply With Quote
Old 28th March 2008, 10:58 PM   #7
diyAudio Member
 
sandstorm33's Avatar
 
Join Date: Sep 2006
Vince- You are so very right about the PCB quality problem with Audioxpress stuff. Too bad because the circuits they published were generally very good .I built some Borbely 100 watt amps and a great preamp on their boards only to have problems later with one amp .The repair was a nightmare because of trace failure on the PC . Hard to believe they would furnish such junk.

I have a Vellemann perf board with flux coated pads I can use for a BOZ ...just thought I could save some time. Basaudio boards would have been good but they are sold out.
  Reply With Quote
Old 28th March 2008, 11:38 PM   #8
diyAudio Member
 
vdi_nenna's Avatar
 
Join Date: Oct 2000
Location: PA, USA
Blog Entries: 1
Send a message via Yahoo to vdi_nenna
I built the Zen, BOZ and BOSOZ...major issues with BOSOZ PS boards. For the BOZ you are beter off point-2-point wiring.
  Reply With Quote
Old 29th March 2008, 01:09 AM   #9
gionag is offline gionag  Italy
diyAudio Member
 
Join Date: Jun 2007
if i can't find a good pcb for BOZ, i'll try to make my own version.


Thanks to all for support.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



New To Site? Need Help?

All times are GMT. The time now is 12:45 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2