|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
26th March 2008, 07:51 PM
|
#1 |
|
www.audiohobby.com
diyAudio Member
|
Simulations in Pass Article
Mr. Pass:
What did you use to produce the simulations in your article on current source amps and full range speakers? Also, how are the values for the simplified speaker impedance model derived from the driver spec? Thanks fo your time Mike |
|
|
26th March 2008, 08:21 PM
|
#2 |
|
The one and only
Join Date: Mar 2001
|
I used Micro-Cap (the old Dos version).
The driver models were fit trial-and-error against impedance curves measured by an AP System 1. |
|
|
|
26th March 2008, 10:49 PM
|
#3 |
|
www.audiohobby.com
diyAudio Member
|
Ah, cool. Thank you.
|
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| do poor simulations sometime miss reality? | freddi | Full Range | 10 | 6th November 2007 02:48 PM |
| Seas L15 simulations | Khron | Multi-Way | 3 | 11th April 2006 04:38 AM |
| Assistance with SPICE Simulations | JMB | Multi-Way | 2 | 8th February 2006 09:28 PM |
| Xamp-simulations problem_s | grataku | Pass Labs | 25 | 31st July 2003 05:10 PM |
| Protel simulations | Kees | Solid State | 2 | 12th November 2002 03:47 AM |
| New To Site? | Need Help? |
