F3 fine tuning

ZUM911 · 30th January 2008, 10:30 PM

Can someone please advise how P2 is adjusted on Mr. Pass's F3? I've studied the schematic but my limited knowledge prevents me from knowing what value to look for and where to look for it.

Many thanks
Rick

MikeW · 31st January 2008, 01:04 AM

To change the Aleph current source. Most set @ 50%.

ZUM911 · 31st January 2008, 01:26 AM

thanks for the reply Mike. I've done searches on setting the Aleph current source with no luck. Any chance for another tid-bit on how this is done, where to measure?

Thanks again

yggdrasil · 31st January 2008, 11:36 AM

Have you looked at the Zen 2 article?

MikeW · 31st January 2008, 11:58 AM

How to set AC current gain in Aleph-X ?

Here is one for the Aleph X. It is the same for the Aleph.

ZUM911 · 31st January 2008, 10:14 PM

Many thanks for pointing me right.

cheers
rick

30th January 2008, 10:30 PM	#1
ZUM911 diyAudio Member Join Date: Jan 2006 Location: Sydney	F3 fine tuning Can someone please advise how P2 is adjusted on Mr. Pass's F3? I've studied the schematic but my limited knowledge prevents me from knowing what value to look for and where to look for it. Many thanks Rick

31st January 2008, 01:04 AM	#2
MikeW diyAudio Member Join Date: Sep 2002 Location: North of Boston	To change the Aleph current source. Most set @ 50%. __________________ MikeW

31st January 2008, 11:58 AM	#5
MikeW diyAudio Member Join Date: Sep 2002 Location: North of Boston	How to set AC current gain in Aleph-X ? Here is one for the Aleph X. It is the same for the Aleph. __________________ MikeW

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM MLTL fine tuning	loninappleton	Full Range	35	17th April 2008 08:31 PM
Fine-tuning enclosure - questions	Paiku	Multi-Way	29	11th September 2007 10:22 AM
What to take care of in fine-tuning a BR enclosure?	tcpip	Multi-Way	8	8th November 2005 04:52 AM
Orion fine tuning	PT914	Multi-Way	6	14th February 2005 10:11 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

31st January 2008, 01:26 AM	#3
ZUM911 diyAudio Member Join Date: Jan 2006 Location: Sydney	thanks for the reply Mike. I've done searches on setting the Aleph current source with no luck. Any chance for another tid-bit on how this is done, where to measure? Thanks again

31st January 2008, 11:36 AM	#4
yggdrasil diyAudio Member Join Date: Sep 2005	Have you looked at the Zen 2 article?

31st January 2008, 10:14 PM	#6
ZUM911 diyAudio Member Join Date: Jan 2006 Location: Sydney	Many thanks for pointing me right. cheers rick

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read