diyAudio (
-   Pass Labs (
-   -   F3 fine tuning (

ZUM911 30th January 2008 09:30 PM

F3 fine tuning
Can someone please advise how P2 is adjusted on Mr. Pass's F3? I've studied the schematic but my limited knowledge prevents me from knowing what value to look for and where to look for it.

Many thanks

MikeW 31st January 2008 12:04 AM

To change the Aleph current source. Most set @ 50%.

ZUM911 31st January 2008 12:26 AM

thanks for the reply Mike. I've done searches on setting the Aleph current source with no luck. Any chance for another tid-bit on how this is done, where to measure?

Thanks again

yggdrasil 31st January 2008 10:36 AM

Have you looked at the Zen 2 article?

MikeW 31st January 2008 10:58 AM

Here is one for the Aleph X. It is the same for the Aleph.

ZUM911 31st January 2008 09:14 PM

Many thanks for pointing me right.


All times are GMT. The time now is 01:21 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio