|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Pass Labs This forum is dedicated to Pass Labs discussion. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
29th September 2007, 03:21 AM
|
#1 |
|
diyAudio Member
Join Date: Apr 2007
|
Need help on x-bosoz
Hi.
I just built a pair of x-bosoz using Kari's boards based on the following schematic: http://www.diyaudio.com/forums/attac...amp=1125427483 My supply voltages are ok, but I have a problem. The output of both my pre-amp boards are very low. With an input of 300mV, I am only getting about 10mV of output. There is sound, but output very low. Any help on how to go about troubleshooting this problem? Can anyone advise what voltage readings I should be getting at various points in the circuit? Any help will be much appreciated. Thanx! |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| To BOSOZ or not to BOSOZ... please comment. | spence | Pass Labs | 4 | 27th February 2012 02:57 AM |
| Poll! What do you use in your X-BOSOZ or BOSOZ for Volume Control and Input Selector? | promitheus | Pass Labs | 87 | 19th February 2006 03:15 PM |
| X-bosoz vs. CCS X-bosoz, how does the sound compare? | acliao | Pass Labs | 14 | 26th February 2004 12:55 AM |
| Bosoz | lawbadman | Pass Labs | 5 | 14th July 2003 02:10 AM |
| 10K Pot for the BOSOZ | raincheck | Pass Labs | 13 | 20th September 2002 06:22 PM |
| New To Site? | Need Help? |
| Page generated in 0.06901 seconds (68.76% PHP - 31.24% MySQL) with 11 queries |
