Needed Heavy Duty Spade Terminal Connectors

speedemon · 12th February 2007, 10:50 PM

Hello All

Somehow I’m on a mission to build my own speaker cable since I’m off work and have a little free time. I have just been amazed on how much these companies are making by selling the high dollar speaker cables such as Kimber, Wireworld, MIT, Nordost, so just for kicks I’m going to build my own. I have two pairs of Synergistic Research Phase II cables which I’m running bi-wired. To start my project off I’m starting with the raw cables from Belden Low-Capacitance OFHC 12awg. With that I am getting some braided sleeves for the outer wrapper and getting the heat shrinks for the ends. What I need help on is looking for some nice heavy duty spade terminal connectors similar like the Ultralink connectors at a fraction of the cost. Does anyone know what other brands are available like this quality not in a twist on but a crimp:

http://www.ultralinkcables.com/cable...ade_large.html

If anyone can help me, then let me know.

Thanks

Apex Jr · 13th February 2007, 12:17 AM

I have a few pair in stock that are solder type
Not Crimp or Twist, but there $3.00 pair
Good up to 10 Awg wire, Also stock 12 Awg PTFE/Teflon
wire silver plated copper wire too.

Steve @ Apex Jr.

EdT · 13th February 2007, 01:13 AM

Not compression. Think this is more secure though.

http://www.speakerrepair.com/Merchan...ory_Code=spade

12th February 2007, 10:50 PM	#1
speedemon diyAudio Member Join Date: Jan 2007	Needed Heavy Duty Spade Terminal Connectors Hello All Somehow I’m on a mission to build my own speaker cable since I’m off work and have a little free time. I have just been amazed on how much these companies are making by selling the high dollar speaker cables such as Kimber, Wireworld, MIT, Nordost, so just for kicks I’m going to build my own. I have two pairs of Synergistic Research Phase II cables which I’m running bi-wired. To start my project off I’m starting with the raw cables from Belden Low-Capacitance OFHC 12awg. With that I am getting some braided sleeves for the outer wrapper and getting the heat shrinks for the ends. What I need help on is looking for some nice heavy duty spade terminal connectors similar like the Ultralink connectors at a fraction of the cost. Does anyone know what other brands are available like this quality not in a twist on but a crimp: http://www.ultralinkcables.com/cable...ade_large.html If anyone can help me, then let me know. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Big spade connectors?	gfinlayson	Multi-Way	6	1st February 2006 02:13 PM
8" 4 ohm heavy duty woofer/midbass needed, who's Goldwood?	eRiCdWoNg	Multi-Way	11	29th February 2004 07:11 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

13th February 2007, 12:17 AM	#2
Apex Jr diyAudio Member Join Date: Jun 2002 Location: Torrance, Calif	I have a few pair in stock that are solder type Not Crimp or Twist, but there $3.00 pair Good up to 10 Awg wire, Also stock 12 Awg PTFE/Teflon wire silver plated copper wire too. Steve @ Apex Jr.

13th February 2007, 01:13 AM	#3
EdT diyAudio Member Join Date: Dec 2006	Not compression. Think this is more secure though. http://www.speakerrepair.com/Merchan...ory_Code=spade

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)