diyAudio (
-   Parts (
-   -   Audio grade axial electrolytics 47uf/63v (

imperfectcircle 5th February 2007 05:06 PM

Audio grade axial electrolytics 47uf/63v
2 Attachment(s)
Hi im looking to replace some Philips electrolyics in my amplifier. They are 47uf/63v. Heres a picture of the amp. there are two differant types of small lytic caps in the amp both are made by Philips. One is a light blue radial type which im going to replace with Cerafines, but the metalic blue axial lead parts are a bit harder to fnd a suitable replacement for. I guess I could just use a radial and leave the leads long, but im not sure this is such a good idea? Anyone know where i could get these caps or something similar or better??

spencer 6th February 2007 03:07 PM

2 Attachment(s)
I have some 22uF 63V BC radial type. Interested can mail me.

Body marking:
021 KO
22u M


DrFrankenstein 9th February 2007 04:53 AM

Xicon's high temp electrolytic caps are favored by most everyone in the DIY audio world. They're a very vivid green.
Check them out here:*140htrl*

None exactly rated for 63 volts but going a little higher can't hurt. I've used a LOT of different caps in my audio circuits, the high temp vivid green Xicon's by far sound the best out of the aluminum electrolytic. There is a noticeable difference when I've used these in contrast to so many others. They just seem more detailed and less harsh sounding.

All times are GMT. The time now is 01:07 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright 1999-2015 diyAudio

Content Relevant URLs by vBSEO 3.3.2