|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc. |
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
|
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Aug 2002
Location: Germany
|
Hi,
is anyone aware of an (online or book) resource, where several scope pictures (like overshoot on a square-wave) an their possible reasons are discussed ? Some are intiutive to me, but some are not. At the moment, I'm having an otherwise good looking square-wave with an additional step on the top, like this: __---------- | | | I'm in the process of tweaking the feedback path of a discrete pre, so I often run into funny (to me) slopes and envelopes, and such a resource would be great. Thanks, Rüdiger
__________________
"I can feel what's going on inside a piece of electronic equipment. I have a sense that I know what's going on inside the transistors." Robert Moog |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Jan 2005
Location: Phoenix, Az.
|
First, have you tuned the probe's capacitance to match the Z in of the scope? This is what calibrator signals are for in scopes. You connect the probe to it then use a tiny screw driver to adjust the capacitance in the little box that is part of the probe's connector until you get a clean looking square wave.
Do that before judging anything going on at the rising edge of a waveform. I_F |
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Feb 2003
Location: ..
|
Linear.com App note 47 High Speed Amplifier Techniques
http://www.linear.com/pc/downloadDoc...28,P1219,D4138 really big - slow to load even with dsl because it has lots of 'scope photos including appendix A: ABC's of probes - written by tektronix staff sarting p69 |
|
|
|
|
#4 |
|
diyAudio Member
Join Date: Aug 2002
Location: Germany
|
jcx, I_F,
thanks a lot, that will keep me going! Rüdiger
__________________
"I can feel what's going on inside a piece of electronic equipment. I have a sense that I know what's going on inside the transistors." Robert Moog |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| scope readings | sakis | Solid State | 27 | 6th March 2009 12:08 PM |
| Great deal on Digital scope. Is this enough scope? | hifimaker | Pass Labs | 1 | 1st May 2007 09:59 PM |
| Reasons for diy??? | Jef Patat | Everything Else | 11 | 9th February 2005 04:52 PM |
| DIY Readings... | Remedial | Instruments and Amps | 6 | 30th June 2004 01:00 AM |
| diode readings | sriegel | Solid State | 2 | 21st January 2002 10:55 PM |
| New To Site? | Need Help? |
| Page generated in 0.06821 seconds (77.26% PHP - 22.74% MySQL) with 10 queries |