Solen Fast Caps ...Any Good ?

EdT · 7th January 2007, 11:54 PM

Are these Solen any good to replace the Bennic or Elna in my TA-10 ? They are located a short distance from me just found out they were here ..LoL

http://www.solen.ca/caps/mkp.htm

CarlyBoy · 8th January 2007, 02:04 AM

Hey EdT,

I came across Solen MKPs in my search for non-electrolytic caps that I could reuse and not have to worry about them wearing out. MKPs were among the cheapest option available and being rated at 630V, great for power supply applications. Stock up on enough of these and you'll never need electrolytics again.

h_a · 28th January 2007, 09:19 AM

It's a pity that the specs are not online. Just a page telling that their caps are excellent, but look for exact values in the specs - which aren't online.

Cheers, Hannes

7th January 2007, 11:54 PM	#1
EdT diyAudio Member Join Date: Dec 2006	Solen Fast Caps ...Any Good ? Are these Solen any good to replace the Bennic or Elna in my TA-10 ? They are located a short distance from me just found out they were here ..LoL http://www.solen.ca/caps/mkp.htm

28th January 2007, 09:19 AM	#3
h_a diyAudio Member Join Date: Sep 2006 Location: Graz, Austria	It's a pity that the specs are not online. Just a page telling that their caps are excellent, but look for exact values in the specs - which aren't online. Cheers, Hannes __________________ fresh matched IRFP240/IRFP9240 fets \|\| AlephJ/JX-kits F5 transistor kits \|\| Burning Amp BA-1/2 transistor kits

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MIT, Solen caps	tom_nice	Swap Meet	4	10th June 2012 11:18 PM
62uF Solen polypropylene fast capacitors	gaborbela	Swap Meet	2	31st January 2009 11:10 PM
Solen Fast Cap vs ASC film/oils in PS	Curly Woods	Tubes / Valves	4	3rd September 2008 04:14 PM
solen caps?	Dingaling	Swap Meet	0	16th May 2007 08:03 AM
Solen vs. Bennic PP caps	Samuel Jayaraj	Parts	4	29th October 2005 04:47 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

8th January 2007, 02:04 AM	#2
CarlyBoy diyAudio Member Join Date: Aug 2006	Hey EdT, I came across Solen MKPs in my search for non-electrolytic caps that I could reuse and not have to worry about them wearing out. MKPs were among the cheapest option available and being rated at 630V, great for power supply applications. Stock up on enough of these and you'll never need electrolytics again.