diyAudio (
-   Parts (
-   -   help for a PCB layout (

pencoat 4th October 2006 01:52 AM

help for a PCB layout
2 Attachment(s)
Here is design which came from a french review LED which did not exist anymore. The author is J.Gest, but the second part of the article has never been published.
The bad thing is that I have started this project, bying all the parts... I've try different ways to make a pcb layout but the result is desastrous.
Could comeone here help me for this?
Here is the component list and the logical diagram. And sorry guys in the thread "CCS for tubes/valves: PCBs" where I start posting this, looks like it was the wrong place :-)

R1=12 Ω 1/2W
R2=12 Ω 1/2W
R3, R4=33Ω 1/8W 5% if T2 and T3 2SK170BL
R3, R4=22Ω 1/8W 5% if T2 and T3 2SK170GR
R5=330 Ω 1/4W 1%
R6=7.5kΩ 1/2W
Rv1=5 kΩ 10 or 25 turns

C1=220 F 35V 105C
C2=220 nF 50V
C3=220 nF 50V
C4=22 F 35V tantale goutte or CTS13

D1 to D4=1N4007
D5=TL 431

T2=2SK170GR or BL
T3=2SK170GR or BL
T5=IRF840, IRF840AFI



All times are GMT. The time now is 03:16 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2