amplifier chassis

penderaudio · 23rd April 2006, 02:11 AM

Iv'e been searching all over the forum to find a nice pre made amp chassis or case perferably with an Alum. face. the only place i found was in Europe. Dose any body know where to get a chassis some where in north america so shipping will be reasonalble. i'm trying to start an 8 channel Ucd-180 project but can't find premade case, I'm lacking the metal working tools for anything decent. Ya I'm a newbi to the forum but i've been builing speakers for a while and want to dip into the amps for a switch. any suggestions or reconmendations would be great! Thanks

AAK · 23rd April 2006, 03:56 AM

http://www.par-metal.com/

jleaman · 23rd April 2006, 04:13 AM

Quote:

Originally posted by AAK
http://www.par-metal.com/

This is where i got mine from.

good guy's too.

penderaudio · 23rd April 2006, 07:20 AM

Cool thanks for the site loks like nice stuff and plenty of options

dsavitsk · 23rd April 2006, 07:41 AM

Par-metal stuff is nice, but you also might want to look at http://www.lansing-enclosures.com/

Pocoyo · 10th February 2007, 07:38 AM

there a lot of chasing made from many company and country
it depends how much money will you spend

try :

http://www.atiresearch-anodized.com/
this is my favourite

the other things you can try gogle, write pre amp chasing
than search

impsick · 10th February 2007, 08:22 AM

ATI looks like some nice chassis

fab · 11th April 2007, 03:13 AM

I remember having already seen an ATI interior showing a metal bracket to join 2 half length heatsinks together to form a complete length for the side of the chassis. Am I correct or was it another type of chassis?

Does someone has a picture of the interior of the ATI chassis becasue this possible bracket may interfere with the positioning of the power output tansistors and attachment means?

I am planning to get an ATI-279M.

Thanks

jleaman · 11th April 2007, 03:23 AM

Quote:

Originally posted by fab
I remember having already seen an ATI interior showing a metal bracket to join 2 half length heatsinks together to form a complete length for the side of the chassis. Am I correct or was it another type of chassis?

Does someone has a picture of the interior of the ATI chassis becasue this possible bracket may interfere with the positioning of the power output tansistors and attachment means?

I am planning to get an ATI-279M.

Thanks

Here you go

http://www.diyaudio.com/forums/showt...71#post1179271

Shaun Perez 2 · 11th April 2007, 03:35 AM

I have the same problem and am currently considering these chassis products:
http://www.thlaudio.com
I am sure it exsists locally but I haven't came across or searched any further. So what was the place in Europe?

23rd April 2006, 02:11 AM	#1
penderaudio diyAudio Member Join Date: Oct 2005	amplifier chassis Iv'e been searching all over the forum to find a nice pre made amp chassis or case perferably with an Alum. face. the only place i found was in Europe. Dose any body know where to get a chassis some where in north america so shipping will be reasonalble. i'm trying to start an 8 channel Ucd-180 project but can't find premade case, I'm lacking the metal working tools for anything decent. Ya I'm a newbi to the forum but i've been builing speakers for a while and want to dip into the amps for a switch. any suggestions or reconmendations would be great! Thanks

23rd April 2006, 03:56 AM	#2
AAK diyAudio Member Join Date: Jul 2004 Location: Florida	http://www.par-metal.com/ __________________ Love when you can, Cry when you have to, be who you must, that's part of the plan.

10th February 2007, 08:22 AM	#7
impsick diyAudio Member Join Date: Dec 2006	ATI looks like some nice chassis __________________ "Nothing happens for a reason. There are just reasons why things happen." Quote me on that. http://stores.ebay.com/AudioGrade?_rdc=1

11th April 2007, 03:13 AM	#8
fab diyAudio Member Join Date: Mar 2004 Location: Canada	ATI chassis I remember having already seen an ATI interior showing a metal bracket to join 2 half length heatsinks together to form a complete length for the side of the chassis. Am I correct or was it another type of chassis? Does someone has a picture of the interior of the ATI chassis becasue this possible bracket may interfere with the positioning of the power output tansistors and attachment means? I am planning to get an ATI-279M. Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

23rd April 2006, 07:20 AM	#4
penderaudio diyAudio Member Join Date: Oct 2005	Cool thanks for the site loks like nice stuff and plenty of options

23rd April 2006, 07:41 AM	#5
dsavitsk diyAudio Member Join Date: Jan 2005 Location: Chicago	Par-metal stuff is nice, but you also might want to look at http://www.lansing-enclosures.com/

10th February 2007, 07:38 AM	#6
Pocoyo diyAudio Member Join Date: Jan 2007 Location: Indonesia	there a lot of chasing made from many company and country it depends how much money will you spend try : http://www.atiresearch-anodized.com/ this is my favourite the other things you can try gogle, write pre amp chasing than search

11th April 2007, 03:35 AM	#10
Shaun Perez 2 diyAudio Member Join Date: Nov 2004 Location: san diego/ sacramento	I have the same problem and am currently considering these chassis products: http://www.thlaudio.com I am sure it exsists locally but I haven't came across or searched any further. So what was the place in Europe?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amplifier Chassis!	The Saint	Aussie Amplifiers	31	14th November 2009 11:27 PM
Amplifier Chassis ?	jleaman	Everything Else	1	2nd January 2009 10:58 AM
Case (chassis) for the amplifier	j3qq4	Chip Amps	0	26th July 2007 08:26 PM
Chassis for amplifier	ackcheng	Swap Meet	7	29th November 2006 07:46 AM
Amplifier Chassis	rjtpeters	Parts	2	29th May 2006 02:13 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read