|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Parts Where to get, and how to make the best bits. PCB's, caps, transformers, etc. |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
21st January 2006, 03:51 AM
|
#1 |
|
diyAudio Member
Join Date: Apr 2005
Location: Simcoe Ont
|
Oscilloscope use.
I am checking a clock OSC (hex inverter) for output with an oscilloscope. Please help. What settings on OSC? I have been reading tutorials but I need to check this IC now. Pin 8 output AC or DC? What range?
|
|
|
21st January 2006, 07:00 AM
|
#2 |
|
diyAudio Member
Join Date: Apr 2005
Location: Simcoe Ont
|
Osc
When I first checked pin 8 with DVOM, I had supply voltage and .1 kHz. I wasn't sure whether meter was good enough for test. I tried with Osc (no experience). Prior to testing I used function generator to set my range and voltage on the Oscilloscope. Upon testing pin 8. My horizontal line raised in response to power up synth. I could not get a waveform. Does DC not have a waveform? Did my meter show my suspected shorted IC?
|
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need help with oscilloscope | error0 | Equipment & Tools | 2 | 6th April 2008 01:22 AM |
| Oscilloscope | XTAL | Parts | 0 | 18th March 2005 05:05 AM |
| PC or USB Oscilloscope | owel | Parts | 9 | 31st March 2004 08:55 PM |
| How to use an oscilloscope | SimontY | Equipment & Tools | 15 | 16th September 2003 10:46 AM |
| oscilloscope | Kilowatt | Digital Source | 12 | 22nd January 2002 12:30 AM |
| New To Site? | Need Help? |
