Calibrating new tip on Hakko 929-2 / 903

ultrachrome · 4th January 2006, 01:53 AM

I just bought the A1243 tip for my Hakko 903 iron. I'm a little confused about the calibration process.

The 929-2 instruction manual says to adjust the calibration pot to room temp, however the soldering tip packaging says to use the offset value.

The A1266 tip that came with my iron is marked with a -38F offset value. In calibration mode, the station is set to 38.

The new A1243 tip is marked with a -31F offset.

What should the station be set to?

poobah · 4th January 2006, 02:28 AM

31

4th January 2006, 01:53 AM	#1
ultrachrome diyAudio Member Join Date: Jan 2002 Location: Puget Sound	Calibrating new tip on Hakko 929-2 / 903 I just bought the A1243 tip for my Hakko 903 iron. I'm a little confused about the calibration process. The 929-2 instruction manual says to adjust the calibration pot to room temp, however the soldering tip packaging says to use the offset value. The A1266 tip that came with my iron is marked with a -38F offset value. In calibration mode, the station is set to 38. The new A1243 tip is marked with a -31F offset. What should the station be set to?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calibrating an emission tester	kenpeter	Tubes / Valves	5	30th June 2008 04:56 PM
Calibrating electronic Ph meter	Netlist	Equipment & Tools	7	14th April 2007 06:46 AM
self-calibrating OPAMP	jackinnj	Swap Meet	0	27th February 2004 05:03 PM
Calibrating a mic	Raka	Analogue Source	1	29th January 2003 06:28 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

4th January 2006, 02:28 AM	#2
poobah diyAudio Member Join Date: Nov 2005	31

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)