need duble diodes for car amp rectifier

demogorgon · 19th October 2005, 07:55 AM

hey guys.

been looking for a while to no avail for some dual diode to220 rectifiers to replace some blown out-of-production ones that was in the PS of an Alpine car amp.

i need them to be 10amps\100V, and preferably as fast an soft as can be..
i would be greatful if you guys could help me out.

-Marius

runebivrin · 19th October 2005, 08:25 AM

You can always buy from Elfa . The BYV42E-200 or MUR2020CT should do the trick.

Rune

demogorgon · 19th October 2005, 02:42 PM

geez, I looked at ordinary recitifier diodes..
should have seen those.

now to cancel the order i have for those that cost me 13bucks a piece..

thanks mate.
Marius

Leolabs · 22nd October 2005, 02:32 AM

Why not try product from IR too???

demogorgon · 10th November 2005, 12:37 PM

i'l have a look, thanks

demogorgon · 26th January 2006, 09:26 AM

hey again, now, i put this amp on ice for a while, but now i'm back at it.

the thing is, elfa and most places i'v looked i can only find common cathode, no common anode.
thats my problem.

do anyone know where i can locate CA type dublediodes?
preferably complimentary CA and CC. 10A\100v.

thanks
marius

N-Channel · 26th January 2006, 11:28 AM

Maruis-

Try these OnSemi diode pairs:

MUR1620CT - (8A x2, 200V) for the positive rail
MUR1620CTR - (8A x2, 200V) for the negative rail

The current ratings of 8A are for each half of the diode pair, hence the "16" in the part numbers.

Just what you're looking for. OnSemi is currently sampling them out, but the catch here is the s/h charge is USD$11.00

BTW, what model Alpine amp do you have? I have alot of old school Alpine stuff (late 80's- early 90's), back when they were more into substance and less into flash. (Sure do miss those green chicklets displays......) I have lots of 3522Ss lying around here. Not sure what I will do with them. Maybe make a good system for the car, or just sell them off on eBay.

Does anyone have any of the DigitalMax stuff from Alp? Comments?

Regards,

Steve

demogorgon · 26th January 2006, 10:06 PM

N-channel: thanks!

the amp is a 97' V12 2*140W, dont know about the model number, havnt found much about it on the web either.

the amp is a joy to work on, elna snapin caps, plenty of fets, the build quality is exelent! i'm being told this amp was the cream of the crop back in the day, and i dont doubt it.

how much can i sample of onsemi?
while i'm there, i might just get some of those transistors as well..

19th October 2005, 07:55 AM	#1
demogorgon diyAudio Member Join Date: Jul 2004 Location: Behind you.	need duble diodes for car amp rectifier hey guys. been looking for a while to no avail for some dual diode to220 rectifiers to replace some blown out-of-production ones that was in the PS of an Alpine car amp. i need them to be 10amps\100V, and preferably as fast an soft as can be.. i would be greatful if you guys could help me out. -Marius

19th October 2005, 08:25 AM	#2
runebivrin diyAudio Member Join Date: Jul 2003 Location: Huddinge, Sweden	You can always buy from Elfa . The BYV42E-200 or MUR2020CT should do the trick. Rune __________________ Do wizards use spell checkers?

26th January 2006, 11:28 AM	#7
N-Channel diyAudio Member Join Date: Mar 2003 Location: Sol System	Double-Diodes Maruis- Try these OnSemi diode pairs: MUR1620CT - (8A x2, 200V) for the positive rail MUR1620CTR - (8A x2, 200V) for the negative rail The current ratings of 8A are for each half of the diode pair, hence the "16" in the part numbers. Just what you're looking for. OnSemi is currently sampling them out, but the catch here is the s/h charge is USD$11.00 BTW, what model Alpine amp do you have? I have alot of old school Alpine stuff (late 80's- early 90's), back when they were more into substance and less into flash. (Sure do miss those green chicklets displays......) I have lots of 3522Ss lying around here. Not sure what I will do with them. Maybe make a good system for the car, or just sell them off on eBay. Does anyone have any of the DigitalMax stuff from Alp? Comments? Regards, Steve

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: Lot of IR rectifier diodes	luvdunhill	Swap Meet	1	4th February 2009 02:19 PM
BYW56 diodes as hi-end rectifier?	Alfetta87	Power Supplies	2	24th April 2006 04:29 PM
Rectifier diodes for UcD 400	m.parigi	Class D	6	14th March 2005 09:42 AM
Integrated Rectifier Bridge VS Rectifier Diodes	Sci	Chip Amps	11	16th July 2004 02:43 PM
Rectifier Diodes	richie00boy	Parts	6	19th April 2004 01:41 PM


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

19th October 2005, 02:42 PM	#3
demogorgon diyAudio Member Join Date: Jul 2004 Location: Behind you.	geez, I looked at ordinary recitifier diodes.. should have seen those. now to cancel the order i have for those that cost me 13bucks a piece.. thanks mate. Marius

22nd October 2005, 02:32 AM	#4
Leolabs diyAudio Member Join Date: Dec 2004 Location: Bukit Mertajam	Why not try product from IR too???

10th November 2005, 12:37 PM	#5
demogorgon diyAudio Member Join Date: Jul 2004 Location: Behind you.	i'l have a look, thanks

26th January 2006, 09:26 AM	#6
demogorgon diyAudio Member Join Date: Jul 2004 Location: Behind you.	hey again, now, i put this amp on ice for a while, but now i'm back at it. the thing is, elfa and most places i'v looked i can only find common cathode, no common anode. thats my problem. do anyone know where i can locate CA type dublediodes? preferably complimentary CA and CC. 10A\100v. thanks marius

26th January 2006, 10:06 PM	#8
demogorgon diyAudio Member Join Date: Jul 2004 Location: Behind you.	N-channel: thanks! the amp is a 97' V12 2*140W, dont know about the model number, havnt found much about it on the web either. the amp is a joy to work on, elna snapin caps, plenty of fets, the build quality is exelent! i'm being told this amp was the cream of the crop back in the day, and i dont doubt it. how much can i sample of onsemi? while i'm there, i might just get some of those transistors as well..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read